Tools » Craigslist Appleton Oshkosh WI

craigslist | tools in appleton-oshkosh-FDL

freud 4'' biscuit joiner (brillion) $75

for sale 4'' biscuit joiner
my number is 920-427-2360
my name is tim

Craftsman 10" Tablesaw (Brillion) $175

Older craftsman tablesaw with a 4 year old Lesson 1 hp motor. Comes mounted on mobile base with retractable casters, 2 cast iron extension wings (one has router mount plate), miter gauge and fence, older craftsman dado blade set. This is a well built saw, not like the newer plastic craftsman saws.

Incra TS-LS table saw fence (Brillion) $250

I have an Incra TS-LS table saw fence, 32" rip capacity, with support legs. Bought a new cabinet saw and no longer need this fence. Fence is about 3 years old, paid about 450.00 with the legs. This is a very accurate fence that will fit most table saws.

spot welder $150 (brillion) $150

for sale spot welder 115volt tong length 6 material capacity 1/8 thick mild steel
my number is 920-427-2360 name is tim

kerosene torpedo heat (menasha) $100

i have a perfect working topedo heater for sale 120 btu heats a two car garage perfect call mike for info thanx 920 213 7102

concrete power trowel (oshkosh) $225

good running power trowel ready to work call 920 279 5955

all steel shelving unit (kaukauna) $50

3' wide 5' long 6'6" high shelving unit with 7 shelves heavy duty will hold a lot of weight call 920-809-9910

PLS 180 self leveling laser with eye (kaukauna) $300

only 2 months old paid 629 for it no longer have need for it call 920-809-9910

Brand NEW Generator (Oshkosh) $850

Brand New Never been out of Box.

Powermate Black Max 8450 Commercial Portable Generator

13hp Honda OHV Commercial motor
8450 max watts
6750 running watts
Tank Size: 8 gallons
Run Time (Hours): 10
Fuel Gauge
Power Source: Gasoline
Starting Method: Recoil Start
Low Oil Shutdown
Receptacles: (1) L14-30R, (4) 5-20R
Muffler: Low Tone w/ Spark Arrestor
Features Folding Handles and Pneumatic Wheels
Powder Coated Steel Finish

I am listing this for my dad. Any questions let me know and I will answer them as soon as possible. Located in Oshkosh, WI I will not ship this. Local pick-up only! Retail on this was over $1200.00 last year when he bought it. He is looking to get $850.00/Firm E-mail me. NO Tire Kickers please. I simply do not have time for it. NO SPAM!!! Thanks for looking.

Air Compressor (Slinger) $1895

Get the perfect Camppbell Hausfield for your home or shop . This is a single phase brand-new 10 horsePower with 120 gallon tank. Must sell 262-339-6903

Snap on Toolbox (Black Creek) $2000

Snap on toolbox in great shape has the ball bearing rollers on the drawers, just repainted with the snap on cranberry color $2000 Please email or call me at 920-676-8300 Thank You, John

3 Sets Steel Machine Stand Legs (Clintonville) $30

Take all 3 sets for $30. Lots of uses. Todd 715-460-1546

6 inch protech bench grinder (Fond du Lac) $10

6 inch protech bench grinder with adjustable light

Band Saw (Oshkosh) $100

Band saw in very good condition. It is a heavy duty older model. It has a 12" base. Comes in a heavy stand. A must see.
Call 920 233-8127

Tool Box (Combined Locks) $500

Craftsman 11 drawer ball bearing tool box with griplatch. This box noamally goes for $700.00 New at Sears, here it is like new for $500.00. Tools not included.
Call Eric 427-8901 if interested.

woork benck/ tool storage (appleton) $50

5 feet by 2 feet wide work top. chest is on casters so very easy to move. Call Brien @ 920-740-5356

16 ft Enclosed trailer (Brandon) $3500

This is a 8.5x16ft tandem axle car trailer with single axle electric brakes. It is in great condition. I used it a couple times to haul bikes. It comes with E-clip tie downs on the floor for hauling motorcycles. Spare tire included.
Must sell.

INCRA INTELI-FENCE (WONDER FENCE) (FOND DU LAC) $100

Great Shape! If interested call Mike at 920-921-0181.

QUEST IND. MAGNA-SET PRO-KIT (FOND DU LAC) $75

Everything needed for setting and checking jointer or planer knives and rollers. Like new! If interested call Mike at 920-921-0181.

OVERSIZED and WIDE LOAD sign (Fond du lac ) $10

72' 2 way sign

Oversized Load & Wide Load

$10.00 Firm

Call (920)933-3635 or Email


CASH SALE ONLY!

3 ROBERTS tools for $100.00 (Fond du lac)

Roberts seamer
Roberts Roller
Roberts Kicker

$100.00 for all FIRM!

Call (920)933-3635 no later than 10pm please or Email


CASH SALE ONLY!

CRAFTSMAN ROUTER CRAFTER (FOND DU LAC) $80

Like new! If interested call Mike at 920-921-0181.

4 way lug nut wrench (Appleton) $5

reply here or call Bill

920-450-6640

New, Hitachi 7" diamond, concrete and tiles blades (Oshkosh)

New, Hitachi 7" diamond high speed concrete blades, 5/8 arbor have 4 - $11.00 each, also have 3 - 7" hitachi diamond tile blades , 5/8 arbor $10.00 each, pickup only

Cornwell 12 Drawer Toolbox (Appleton)

60" wide x 48" tall" x 24" deep
12 Drawers with protective mats that fully extend
Barrel style lock
4 Heavy duty caster wheels
Wood top surface so you can use it for a bench
Maroon in color
1,800 Cash OBO
Blackzx6r03@yahoo.com

Jack stands (oshkosh) $20

2 6 ton jack stands in good shape Almost like new. 920 279 5955

roller saw horses (odhkodh) $15

adjustable in height call 920 279 5955

electric blower (omro) $50

for sale electric blower 1/2 horse power , brand name is maraton ,110 power

make an offer

2500 psi Power washer NIB (Theresa) $100

Had for about 1 year have not opened, bought for 190 new. Moving, no need for it.
Call 414-852-5533 Milton

12" Delta Drill Press $75

With Custom built Stand and Chuck key

Call Brian @ 920-202-4421

STAND UP AIRCOMPRESSOR (APPLETON) $750

IT WAS USED IN MY TRAILIOR FOR NAIL GUNS ONLY USED IT FOR AROUND 6 MONTHS COMES WITH EVERYTHING YOU SEE. BOUGHT IT NEW HAVE AROUND 1050 IN IT

Electricians/HandyMans Special - NEW Fluke 179 Multi-Meter (Stevens Point / Appleton) $115

For Sale: Price Somewhat Negotiable - No LowBallers - Would Sell Today for $100! Thats Better than half price!

Please Click on Link for Full Ad, Item Specifics & Contact Info in Wausau Craigs List - Thank You.

This is a True RMS with BackLight and Temperature Multi-Meter, Model # 179.

http://wausau.craigslist.org/for/1475887549.html

rotary hammer drill (appleton) $100

bosch rotary hammerdrill 11224vsr can be used as hammer only, hammer and drill, or drill only. works great, retails for over $200

Milwaukee Tool Set (Poy Sippi or Neenah) $175

Milwaukee tool set, includes tool bag. Nothing wrong with it, just getting a new set. Sawzall, drill, skill saw and power charger and 2 batteries. Paid $500+ for the set. Great deal! Call Now ! 920.205.0982
Live in Poy Sippi but work in Neenah.

4 piece dewalt set and job site radio (menasha) $300

This is a USED DEWALT 18V XRP 4PC COMBO SET everything works great have had no problems.

DC-925 18V XRP hammerdrill 1/2"
DC390 18V XRP skill saw
DC385 18V XRP sawzall
DC919 18V Flash light
DW919 1 hour charger 7.2 TO 18V
2 18V XRP batterys
DEWALT job site radio/battery charger DC011.
if you ask i will send you pictures.

crafstmen table saw in good condition works great (oshkosh) $50

crafesmen table saw on homemade stand very good condition!

Renegade TMB 7000 Automatic Parts Washer (110v) (Oshkosh, WI) $3500

Heavy Duty Parts Washer - Usage: Automatic Cleaning, Batch Washing, High heat, High Pressure
Retails for $5000 or more. Used only 5 times. Do not have the need for it. Great for garages and auto shops. Still in new condition. Will sell for $3500/OBO. Call or email with questions!

110v Model
Heavy Duty 1/2" Polyethylene Base
Automatic Low Level Shut Down
Oil Skimmer with programmable 7-day Timer
7-Day System Timer
0-30 Minute Wash Cycle Timer
Safety Door Switch
Parts Tree
Max Temperature 175 degrees max.
Pump 60gpm @ 26psi
Motor Driven Spray Manifold
Load Large Parts With Ease
Maximum Loading Capacity 500lbs
Total Workspace Area - L(30") x W(22") x H(21")
Total Outside Dimensions - L(36.0") x W(52.0") x H(52.25")

Fork lift LP tank Alum. (Appleton) $125

Used Alum. lightweight LP tank for fork lift's - good shape
I have a couple of these.
$125/ea. or offer
920-378-2788

BANDSAW (dale) $375

a must see,built in wheel sander, everything works great, $375.00obo 9204505804

Craftsman Drill Press and Stand (Appleton) $75

Hi,

I have a Craftsman Drill Press and Stand. It comes with the chuck. I am asking $75 or best offer. No reasonable offer will be refused.

Thanks!

Kawasaki 19.2v cordless drill (oshkosh) $50

have pic if needed. cordless drill with charger and 2 batteries/case.

Craftsman Router and Accesssories (Appleton) $200

Craftsman Router with table
Includes Bits
Includes Crafter for making table legs, chair legs, etc
Includes Vermont America Router Pantograph

Asking $200 for everything Or Best Offer.
Cash Only
No Reasonable Offer will be refused.

Craftsman 9 Inch Table Saw and Dado Blade (Appleton) $100

I have a Craftsman 9 inch Table Saw, it has a bevel cut setting. I also have a brand new Craftsman Excalabur 8 inch Precision Adjustable Dado that will adjust from 1/4 to over 13/16. The Dado is still in the package. I'm asking $100 OBO for the works. No reasonable offer will be refused.

Cash Only,

Thanks for looking!

Snap On Tool Box (Oshkosh) $1499

Red roller box with storage on 3 sides. All keyed alike. Center island type cabinet.
The blue 9 foot Snap-On box is also here in like new condition. call for more info.

Lots more stuff also for sale at.

Main St. Resale
656 N. Main St.
Oshkosh 54901
(920)-233-3515
10-6 M-F
10-5 Sat

laith bench top $1000

laith and lots of extras $1000

Paslode Positive Placement Gun (Fondy, Oshkosh) $100

I have a Paslode Positive Placement Gun that I would like to sell.
It is about 1 year old and used only a few times. It works great I simply don't use it enough to keep it.

I will also include 3/4 of a box of nails with it also, the nails alone are 60 some dollars a box

Please email for mroe info

Thanks for looking

Moving Cart - Dolly - Good Condition (Appleton) $75

Moving Cart/Dolly in good condition. Size of platform is 60"x 16.5". Height of platform from ground is 10". Handle is removable. We used it to transport refuse containers from our shop to the dumpster. Works great. We have another one and do not need this one. $75 OBO ~ 920-585-2525 ~ Serious Inquiries Only

Monroe Shock Absorber Cabinet (Berlin Area) $25

Metal shock absorber cabinet with heavy duty casters

Table saw dust collection guard (Omro) $80

PSI table saw dust collection guard with ceiling mount. Works great. Connects to a 4" dust collector but can be reduced to connect to a shop vac.
Call 920-420-8016 and leave a message and I will get back to you.

10" Radial Arm Saw (7 miles north of berlin) $100

Montgomery Wards 10" radial arm saw great condition, comes with extra blades

Snap On wire feed welder (Neenah) $1200

Used Snap On FM140 110 volt wire feed welder. Includes tank with regulator and newer spool of wire.Great shape, has had very little use in the last few years.Snap on still sells these new. Email or call me at 920-450-7713

Cordless Drill/Driver (Town of Menasha) $20

Black & Decker Firestorm 12V Cordless Drill/Driver 920-740-2687

snap-on 3/8 12v impact (oshkosh ) $150

I have for sale a 3/8 12volt cordless impact comes with 2 batt. a charger and the case. Its a little over a year old I've had the red cover on it since new so its very nice under the cover. nothing wrong with it. yamaha292@charter.net or 920 203 5786 Adam. trying to get 150.00 O.B.O

Pipe Threader Hand Ridgid $75

For Sale
Hand pipe threader Ridgid
Dies from 3/4-1/8
$75.00 715-850-0064

Welder/Miller CP 200 3 Phase (High Cliff/Sherwood) $600

Miller CP200 3 phase wirefeed welder with a 10A feeder. Comes with regulators, ground cable and gun.

Please call 920-702-3630 and ask for Jerry with questions.

Drill press (Black Creek) $125

Craftsman floor model, 1/2 chuck, 2/3hp motor. Drill is in excellent shape. Cash only

Campbell - Hausfeld Air Compressor (Fox Cities - WI) $295

Nice unit, maintains 90 p.s.i., has a 20 gallon tank, pressure switch and tank drain.
5 H.P. 240 / 220 Volt (ONLY). Includes about 40 feet of hose, has a wheel kit.
This is a medium duty - twin cylinder unit in great condition!

I am also selling several air tools as well...please enquire when calling.

ABSOLUTELY NO EMAILS!! Contact: Craig at (920) 809-8621, anytime.

Craftsman Toolchest (Fox Cities - WI) $450

13 drawer unit in great condition! It has a custom made heavy duty aluminum side shelf,
a creeper holder, step stool holder, and additional mounted hooks included.
These now sell for $895.00 new at Sears. I no longer do mechanical work and don't need it.

ABSOLUTELY NO EMAILS PLEASE!!
~ NO TOOLS ARE INCLUDED ~
A SINGLE KEY LOCKABLE UNIT

Call Craig at (920) 809-8621, anytime.

dewalt 12 in planner (appleton )

i have a 12inch dewalt planner i took in on trade that i just dont want i dont do much wood work i know what they go for so no really low offers
if you make a reasonably offer its yours just give me a call 9208432527

Wheelhorse Compact Tractor (Fox Cities - WI) $795

1974 Wheelhorse model A-90 Special...
Has a 10 h.p. Tecumseh I/C engine, 3 speeds forward & reverse,
a 38 inch mower deck - rear discharge (rebuilt 3 seasons ago).
Includes a 42 inch (factory made) Snowplow / dozer / grader blade,
Wheel weights and chains. A regular tractor type cushion ride seat.
It has a sealed beam headlight and electric start, with a elec. P.T.O.

This is not a toy! It's a real mans machine that will pile snow 4 ft. high!
I WILL CONSIDER TRADING FOR A DECENT: UTILITY TRAILER, ATV, MOPED,...OR?

ABSOLUTELY NO EMAILS & WILL NOT SEPARATE ATTACHMENTS!!

Call Craig at (920) 809-8621, anytime!

engine lift heavy duty (little chute) $150

engine lift 8ton jack square tubbing 3'' 1/4 thick was used to lift harley on to 2 foot stand

Truck Tool Box (Menasha) $40

No longer needed truck tool box. Worked nice for our Ford Rangers but can be used for a Chevy S10 also, both sides open very nice. Inside measurements are 4 ft 4 inches $40 OBO Call to set up time to come get. 920-585-0610

wire feed welder 220 165 amp (plymouth) $375

good condition works well
solar 165 with small gas bottle
262 483 3609

WTI fenders w/mounting brackets (DePere Wi.) $1000

I have a set of wti fenders to fit a kenworth w900l. They have been painted reciently, fenders ultra violet, and brackets black. They are in like new condition, and I need to make them go away. New they sell for $1800.00 plus. call me at 920-336-6284

Craftsman 10" Table Saw (Fond du Lac) $215

8year old 10" Craftsman contractor style table saw. This saw has served me very well for amost 8 years. It is still in very good condition and would be great for someone who is thinking of getting into woodworking or if you need a table saw that will work very well for you but do not necessarily want to pay for a new one. With this saw I am selling: 10" newly sharpened blade, a 8" adjustable dado blade, three blade inserts, the original to the saw, dado and zero clearance insert. I have the wrench to change the arbor nut, a dust bag that attaches to the bottom of the saw, miter fence, rip fence and the owners manual. The saw is also on a mobile base which comes with as well. The model # is 315.228310

Blue Point - Air Cut-Off Wheel (Fox Cities - WI) $65

Nice unit, compact size. A Snap-On Brand Tool!
A bargain at this price. Includes extra cut off wheels.
Used very seldom...and no longer needed by this owner.
$65.00 FIRM. Call Craig at (920) 809-8621, anytime.

NO EMAILS PLEASE!!

Air Impact Wrenches (Fox Cities - WI)

2 - Air Impact Wrenches as below:
1 - 1/2 inch drive, with forward/reverse - good condition. $25.00
1 - 3/8 inch drive, Chicago Pneumatic, with forward/reverse $30.00
Both work fine, but are no longer needed by this owner.

NO EMAILS PLEASE!!
Call Craig @ (920) 809-8621, anytime.

Pedistal Grinder (Fox Cities - WI) $75

Duracraft 1/2 h.p. all ballbearing 120 volt motor.
6 inch grinding wheel and 6 inch wire wheel.
Has a heavy duty all steel pedistal. $75.00 firm.

NO EMAILS PLEASE!!
Call Craig @ (920) 809-8621, anytime.

Air Wrenches - Chicago Pneumatic (Fox Cities - WI) $25

2 - Chicago Pneumatic Air Wrenches. Selling as $25.00 (each).
3/8 inch with swivel air connector - $25.00
1/4 inch with swivel air connector - $25.00

No longer needed / nice condition!

NO EMAILS PLEASE!!
Call Craig @ (920) 809-8621 anytime.

mac top box (little chute) $40

3draw tool box 24 10.5 $40

DOALL C916 -SA HORIZONTAL BANDSAW (RACINE,WI.) $12500

Selling DoALL Horizontal Bandsaw
Model: C916-SA
YR: 1999
Condition: Excellent

Fully automatic, swivels 45 and 90 deg.
Miter cuts
1" blade
Control panel
Coolant system
Bundle Attachment included
Cuts 10-3/4" Rounds
With 5 ' roller table

In shop, under power for inspection,
Price: $ 12,500 LOADED ON TRUCK.

Please contact me for information,
414-763-1930 ask for Gary

Craftsman Snowblower (oshkosh) $245

Craftsman Snowblower

Briggs and stratton craftsman 5.0hp 22" 4cycle electric start snowblower

$245

Milwaukee Worksite Radio (oshkosh) $50

Milwaukee Worksite radio

Product Dimensions: 15.8 x 19.5 x 10 inches ; 21 pounds
Shipping Weight: 21.2 pounds (View shipping rates and policies)
Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
Note: Gift-wrapping is not available for this item.
ASIN: B000EX4I1K
Item model number: 49-24-0280


$50

Drywall Rock Cart Dolly in Great Condition (North of Appleton) $99

Drywall Rock Cart in Great Condtion.
920-639-4948

Folding Work Bench (Appleton) $30

New in the box
738-6765

New Tool Box (Appleton) $15

20" Tool Box
738-6765

7000 Watt Generator W/ Extras (DARBOY) $500

Nice GENERAC 7000 Surge watt//5000 running watt Generator on wheels that has one duplex 120/20 amp recept., one 120/240--20 amp twist lock recept, and one 120--20 amp twist lock recept. Comes on a cart with wheels and has owners manual. Also comes with a NEW still in packsge 50 foot 2500 watt 10 awg twist lock extension cord and a new three way twist lock splitter to three household outlets. The cord and splitter cost over $100.00 alone, this was a Stand-by unit and NOT USED AS A CONSTRUCTION UNIT. Excellant condition. Has a 10 horse one pull start Briggs & Stratton motor. Asking $500.00 CASH for all. call 687-6338. Thank you

Rolling Ladder (SEE PICS) (Oshkosh) $500

Rolling ladder/ scaffold for sale. 6ft. to 25ft adjustable. Extra guards and 2 man platform included. 500 o.b.o. No spam please.

Electric platform lift (Oshkosh) $1200

Electric platform lift, runs and drives. 1200 o.b.o., no spam please.

Bosch Colt 1.0 HP Palm Router (Fond du Lac) $75

Bosch Colt 1.o HP Palm Router. Comes with two bits, one never used and also a hard case. Used only to edge a headboard and a table. Call (920) 266-8218

Bosch RotoZip RZ18V-1100 Cordless (Fond du Lac) $75

Bosch RotoZip RZ18V-1100 Cordless. Like New, used once. It also comes with a RotoZip Bag that was not in picture. When I grabed the box to check some specs it was inside, never used. It also comes with a pack of five 1/8 inch rotozip sabercut zip bits, never opened. Call (920) 266-8218

Makita Plate Joiner 5.6 Amp (Fond du Lac) $150

Makita Plate Joiner 5.6 Amp, only used to make a couple cuts. Paid about 200.00 new. It comes with the hard case and also two containers of biscuits. Call (920) 266-8218

L.B. White torpedo heater LP (Fond Du Lac) $125

L.B. White torpedo heater 150,000 btu LP gas with thermostat works good $125.00 call 920-904-7006

dewalt 12-1/2 planer (fond du lac) $270

dewalt 12-1/2 thickness planer used very little works very well asking $270.00 call 920-904-7006

5000W generator (appleton) $375

Coleman powermate 5000W generator Extended run base unit. 10 hp. briggs . 2- 120 outlets, 1- 240. Used for one project, estimated 20hrs run time,about 5 years ago. Like new condition.

Snap On 1/2 Impact (Lomira) $25

This is a used Snap On impact. It is starting to get weak. It would be good for light work or for parts. I accept cash or paypal.

Matco 3/8 Impact (Lomira) $35

This is a used 3/8 impact. It works good. I accept cash or paypal.

Mac Torx Sockets (Lomira) $50

Brand new set of tamper proof torx T10 to T50 and internal torx sockets E6 to E16. They have a lifetime warranty through any Mac Tools Dealer. $50 I accept cash or paypal.

Sears Craftsman 10 Inch Table Saw (Appleton) $75

Sears Craftsman 10 Inch Table Saw with all of the options seen in the photo. Heavy duty cast iron bed with extensions, ripping fence, adjustable miter, blade guard. Good condition.
$75. needs motor. Reply via email.

Aluminum ladder rack (Little Chute) $225

It is an adjustable aluminum ladder rack, off of a full size chevy. My brother in law no longer needs it! If you are intrested let me know, thank you!!

husqcarna 455 chain saw $200

husqnarna chain saw
455 rancher farm tough bar 18' inch cutting bar
looks like new call (920) 810-4866

Cornwell 64" Toll Box w/Canopy (Markesan) $7500

I was a Cornwell Tool Dealer that went out of Business.I was not able to return a Limited Edition Black Cornwell Tools 64" Tool Box with top Canopy.Canopy has light Strip with peg board.All drawer liners.Never had a tool stored inside of it.This set up had a retail price of $11,995.95,Dealer cost was 8199.99...I NEED to SELL this unit.Looking for a RESONABLE offer,CASH or trade for a newer car trailer,16ft with 2ft Beaver tail,Stake pockets on sides,electric brakes and ramps.Please call 920-229-1113 and leave a message and I will return a call...

Renegade TMB 7000 Automatic Parts Washer (110v) (Oshkosh, WI) $3500

Heavy Duty Parts Washer - Usage: Automatic Cleaning, Batch Washing, High heat, High Pressure
Retails for $5000 or more. Used only 5 times. Do not have the need for it. Great for garages and auto shops. Still in new condition. Will sell for $3500/OBO. Call or email with questions!

110v Model
Heavy Duty 1/2" Polyethylene Base
Automatic Low Level Shut Down
Oil Skimmer with programmable 7-day Timer
7-Day System Timer
0-30 Minute Wash Cycle Timer
Safety Door Switch
Parts Tree
Max Temperature 175 degrees max.
Pump 60gpm @ 26psi
Motor Driven Spray Manifold
Load Large Parts With Ease
Maximum Loading Capacity 500lbs
Total Workspace Area - L(30") x W(22") x H(21")
Total Outside Dimensions - L(36.0") x W(52.0") x H(52.25")

Tire Balancer ( 1 Year Old ) (Dale) $1000

One year old kwik-way digital tire balancer, Works like new. will balance up to 22" wheels. Paid $1800.00 and will take a loss to see it put to work. also comes with special orderd dies for bigger rims. call (920)213-7387 Ask for Bill.


$1000.00 O.B.O.

Supermax YCI 1 1/2 CNC Mill (Kenosha) $4950

R-8/4200 rpm spindle @ 2hp/3hp
26" x 12" x 5" travels
16" knee
12" ram
42" x 9" table
Prototrak Conversational CNC Control
2 Axis CNC with 3 axis digital readout
Canned milling cycles
Full cutter comp
I-94 in Kenosha

2001 Haas HS-1RP HMC (Kenosha) $29500

15.7" x 15.7" Pallets
2 pallets/ 600 lb cap. each
7500 rpm
24"x 20" x 22" travels
20 hp
cat 40 taper
24 atc
Haas CNC Control
auger, rigid tapping
1 MB Memory, macro's
rotation & scaling
hand jog wheel
floppy drive
I-94 in Kenosha

Cement Mixer (Oshkosh) $100

3 1/2 Cubic Foot Capacity
MFG. Central Machinery
110 Volts
Ph 920-235-7122

Milwaukee Tilt-Lok Circular Saw (oshkosh) $80

Milwaukee 6390-20 Tilt-Lok 15 Amp 7-1/4-Inch Circular Saw with Tilting Handle

The Tilt-Lok handle on Milwaukee's 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 pounds and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukee's reputation for durability.
FEATURES


New exclusive Tilt-Lok main handle adjusts to the work or most comfortable work position
10.4 pounds net weight - lightest 7-1/4 inch, 3.25 maximum horsepower saw reduces operator fatigue, easier to handle
15 amp, 3.25 peak horsepower motor - most powerful circle saw cuts tough materials including headers, microlams and wet lumber with ease
Wide, clear sight line - superior blade visibility from either side

SPECIFICATIONS


Blade Size: 7-1/4 in.
No Load Speed: 5,800 RPM
Spindle: 5/8 in.
Spindle Lock
Soft Grip Handle
Adjustable Handle
Blade Position: Right
Depth of Cut at 90°: 2-7/16 in.
Depth of Cut at 45°: 1-13/16 in.
Depth of Cut at 50°: 1-11/16 in.
Length: 13-3/4 in.
Tool Weight: 10.4 lbs.
Case included.

$80

mk 770 wet saw parts (hortonvill) $60

I have everything for a mk770 but the motor.
mk770 body
water pan
water pump
hot dog blade
water cover (hood)

Asking $60 obo

Please contact me (Dean) at :
920-213-5530

Grex Staple Gun W/ Case (Hortonvill) $20

I think this staple gun was only used one time and I don't need it anymore. Looking to get $20 obo

Please contact me (Dean) at:
920-213-5530