Manufacturing Jobs » Craigslist Austin TX

craigslist | manufacturing jobs in austin

Field Service Engineering (Austin, Tx)

We have immediate openings for Short and Long Term Field Service Engineering Opportunities:

1. Leica Microscopes; including wafer handling systems
2. JEOL SEM/TEM Systems
3. Hitachi High Tech CD SEM Systems

Requirements:

• 3 - 5 years with the OEM

• Capable of Software/Hardware/Wafer Handling systems repair, preventative maintenance & training

• Ability to work confidently independently without close day to day supervision

• Excellent customer service and customer satisfaction skills

• Ability to pass a complete background check and drug screening without failure

• Ability to work as a 1099 or full time employee

• 2 or 4 year degree in electromechanical systems or electronics

* Location: Austin, Tx
* it's NOT ok to contact this poster with services or other commercial interests
* Send resume

Electronic Mfg - Solder + Mech Technicans (Southwest Austin (290W + Oak Hill))

We are an electronic contract manufacturing business with 17 years in the Austin area, seeking experienced personnel in hand soldering and/or mechanical assembly

Requirements for Soldering Positions:

> Class II or Class III type work
> Ability to work on SMT and PTH technology
> Read from work instructions and assembly drawings.
> Be able to work continuously on the same project for long hours.

Requirements for Mechanical Tech Position:

> Read prints and follow technical documents
> Have basic soldering skills
> Be able to follow directions from a supervisor
> Be able to lift 25 lbs.
> Work with a wide variety of mechanical tools
> Have traits of responsibility
> Must be able to work independently, and ask questions when needed

Applicants should also be willing to learn new skills and be quality oriented. Other requirements: Problem solving, communication, customer orientation, team skills, project management, and quality.


We are located on 290 West, 7 miles from the "Y" in Oak Hill.

Please consider commute distance before sending in your application. Time to travel to our location from Round Rock is approximately 45 minutes.

Our business hours are 7AM to 5PM - Monday to Thursday / 8AM to Noon - Friday.

We work in a temperature controlled building with two 10 minute breaks and an hour for lunch. Family owned and operated.

Please email your resume and wage requirements for the opportunity to work with an 17-year established company. All resumes WITHOUT wage requirements will not be considered. EOE.

Please submit resumes and information via this ad, make sure that you have a current phone number listed within the response or resume. No walk-ins will be interviewed.

Machine Operator (East Austin)

A Small Company seeks a motivated, responsible, hard working machine operator for immediate hire.
The tasks include but are not limited to:

Schedule and complete jobs within prescribed time frame
Set up and operate metal fabricating equipment
Maintain equipment (punch press, brake press, shear, mill, lathe)
Design and build prototypes
Ensure work conformity and quality control
Maintain supply and product inventory
Assemble goods into final products
Perform other tasks and duties assigned by management
Part Time/Full Time

Qualifications:
Must have some machine shop experience
Must have some welding experience
Must have basic math, reading and writing skills
Must be able to lift 50lbs.
Must work within a team environment and be able to work with little supervision
Must have excellent attitude and GOOD work ethic, able to show up on time
Must be available M-F, no weekends
Must speak English and be able to work in the U.S.A.

To Apply:
Fax resume with a summary of qualifications to 512-385-3501
Have employer references on resume with contact information

DO NOT APPLY IF YOU DO NOT MEET QUALIFICATIONS

Document Control Specialist (NE - Austin)

Fast paced hi-tech manufacturer company is seeking a highly organized, detail oriented candidated that will manage the document control process. Candidate must have 2-5 years experience working in a Document Control, BOM, Configurations, PLM or closely related capacity. PLM experience is preferred, especially Arena PLM. Minimum 2 year technical degree. Position is contract to perm and salary is commensurate with experience.

CNC Mill Machinist/Programmer (NE Austin)

Semiconductor business seeking experience machinist to work in quartz and ceramic CNC Machinning.

Job Description:
Must be a ble to set up and program CNC Mill Machine

Requirements:
5 year minimum experience in CNC Mill Machinning
CNC Mill Programmer knowledge a plus
Experience in Quartz and Ceramic a plus

QUALIFY APPLICANT EMAIL RESUME TO: JNESBY@LTDMATERIAL.COM

Sheetmetal Mechanic (NE Austin: 290 & 183)

Must have the ability and proven experience to layout, program, set-up, and operate sheetmetal equipment that includes an Amada Brake Press, Amada Pega 344 Punch Press, Timesavers, Pem Serter, etc. Please visit Scientific Machine & Welding, Inc. at 3402 Duke Road, Austin, TX 78724 to complete an application.

Press Operator/Material Handler (Northwest Austin)

Immediate Opening in Austin TX, Duties for this position include operating a hydraulic compression press, Compounder, Grinder, Shredder and equipment maintenance. Need good hand/eye coordination, Standing for 8 hour shift.

Employee must be able to safely operate all machines within the compression mold cell, including trim presses, oven press, inspection belt, baler and automatic wrapper machine. Fork Lift experiences a must. Complete all quality checks, complete paperwork required for safety, QS-9000 and production, comply with all applicable safety rules and regulations and safely operate all required powered and hand tools.
May be assigned to Shipping and Receiving area as needed. Familiar with standard concepts, practices, and procedures within area of responsibility.

Education/ Training:

Must have a high school diploma or GED, Must be able to lift 50 pounds frequently, and 20 pounds constantly, and 100 pounds occasionally with assistance. and must be able to successfully complete required on the job training. The ideal Candidates must have at least 3 years experience as a Press operator, able to do set-ups, and have experience in plastics manufacturing. The position is for 1st shift. Must be able to submit information for a background check and we will also perform a drug test


Work Environment:

The noise level in the work environment is usually moderate.
50% of day Require’s gloves and eye/ear protection where applicable

Extrusion Engineer (Georgetown, TX 78626)

Client located in Georgetown, TX has a full-time position for an Extrusion Engineer to develop and oversee production activities in a light industrial manufacturing facility. The ideal candidate will possess the following qualifications:

• Requires 5 years of experience in profile extrusion development engineering.

• Must have experience with single and co-extrusion processing.

• Experience with downstream equipment including water baths, pullers and cutters.

• Experience with a variety of materials including TPE, EVA, and other engineering resins.

• Excellent people, communication and training skills.

• Automotive manufaturing experience a plus.

Please submit your resume to bjackson@sedonagroup.com or FAX to 1-512-864-3503 for consideration.

Printer Operator (South Austin)

Dynamic growing imaging company is seeking conscientious, high energy individual with a positive attitude to work in our large format printing department. You will operate a variety of printers including Epson 9800, Mimaki JV-5, HP 6100 flatbed. We are also installing a Zund G3 cutting system that you will operate. Experience in the operation and maintenance of large format printers is required. The responsibilities include: run a RIP application such as Onyx or Caldera, manage workflow, pay attention to details and quality, and the ability to calculate the most productive throughput to run maximize yield. Must be able to perform under pressure and work within established standards and deadlines. We are looking for someone that can think on their feet and can work effectively on a team.

This is a great opportunity for the right person. Company offers a creative environment, competitive salary and full benefits package.

Document Control Engineer (NE Austin)

Fast paced hi-tech manufacturer company is seeking an engineer that will manage the document control process. Candidate must posses either EE, ME or Industrial Engineering degree and have 2-5 years experience working in design engineering or sustaining engineering capacity. Candidates will not be considered that don’t meet these requirements. Proven track record with Document Control, BOM, Configurations and PLM experience is preferred, especially Arena PLM. Position is contract to perm and salary is commensurate with experience. Please e-mail your resume for consideration.

Assembly Technician (NE Austin)

Fast paced, Hi-Tech Manufacturing Company seeking a full time assembly technician. Day shifts only. 2-5 years relavent experience and some technical school training mandatory. Candidates that do not meet these requirements will not be considered. Salary commensurate with experience. Health insurance, vacation, benefits. Please e-mail resume for consideration.

Manufacturing Operations Specialist (CEDAR CREEK, TX)

Immediately seeking a Materials Specialist for a 3-month contract with possible longer-term opportunities at a biomanufacturing company in CEDAR CREEK, TX. (Not Cedar Park) Please note that Cedar Creek is 14 miles EAST of Austin Bergstrom Airport - almost to Bastrop. If this is a commute you would not be interested in, please do not apply.

Job Description:
- Assembles company products according to procedures and/or work instructions, seals containers and affixes identification labels to vials and containers.
- Employee will operate automated filling machine and various pumps in an ISO 7, Class 10,000 clean room.
- Will adhere to company generated training documents, process orders, work instructions and safety policies.
- Other duties as assigned.

Requirements:
- At least 2 years of manufacturing experience
- Clean room and biomanufacturing experience preferred
- Able to submit to thorough background check
- Reliable transportation to CEDAR CREEK

If interested, please send your resume in Word format.

Strategic Buyer/Manufacturing Engineer (Georgetown, Texas)

Xycarb Ceramics, Inc., a growing Quartz Manufacturing Company in Georgetown, Texas is seeking a full-time STRATEGIC BUYER/MANUFACTURING ENGINEER to join our team.


THE REQUIREMENTS
· Must have 5 years experience in Material and Services Procurement
· A College education in Accounting or Economics is a prerequisite
· 5 years experience as a design engineer
· Proficient using computer aided design programs such as Pro-E, Solid Works, Auto-Cad and etc
· Manufacturing experience (Preferred but not required)
· Proficient in SAP (Preferred but not required)
· Able to speak and write in both languages, English and Chinese. (Preferred but not required)

THE ROLE
The Strategic Buyer/Manufacturing Engineer is responsible for defining sourcing strategies, negotiating agreements, and providing supplier agreements and internal customer management to deliver financial savings and quality process improvements.

To develop, survey and implement strategic sourcing within the procurement policy of Xycarb Ceramics. The Strategic Buyer’s main scope is to create a policy for raw material, semi-finished products and trade items. In addition, outsourcing/in sourcing of services & activities MROS related goods.

As a Manufacturing Engineer, person will be responsible for designing our products using computer aided design systems

THE RESPONSIBILITIES
· Define and implement procurement policy, based on Xycarb’s portfolio.
· Define and implement procurement tooling to measure supplier’s performance based on reliability, quality and certification.
· Lead negotiations with strategic suppliers.
· Define and control procurement procedures.
· Provide support to various employees in negotiations with third parties.
· Investigate new potential markets and suppliers that could be beneficial to Xycarb Ceramics.
· Handle penalty and damage claims.
· Interact with ME and Sales with respect to Xycarb’s customer requirements,
· Search for new suppliers/markets
· Research, define and implement optimal logistic conditions for warehousing, transport and administration
· Interact with Operations & AQ to define requirements for outsourcing activities for Xycarb’s customer products
· Investigate, define and calculate activities to outsource on ‘plant’ based upon non-core competences and implement new logistic conditions for these areas
· Manages and communicates supplier performance through supplier scorecard.
· Negotiates with suppliers to obtain contract pricing schedule compliance, and value add services
· Take initiative in reducing material cost, managing scheduled deliveries and resolving part discrepancies.


Xycarb Ceramics offers exceptional benefits including Medical, Dental, Vision, 401K, LTD/STD. Qualified applicants should apply by submitting resumes in MS Word format to
syndie.ramirez@xycarb.schunk-group.com

MUST pass drug test and background check prior to employment.

NO PHONE CALLS PLEASE

Luthier/Woodworker (Southwest Austin)

Collings Guitars, one of the world’s premier manufacturers of acoustic and electric guitars and mandolins is looking to hire an experienced luthier or woodworking professional at its facility in SW Austin
EDUCATION and/or EXPERIENCE:
The minimum educational requirement is a HS diploma or GED certificate with two to four years experience and/or training; or equivalent combination of education and experience. Excellent hands and detail experience such as may be obtained in the automotive, furniture or other related industry is desirable.

LANGUAGE SKILLS:
Ability to read and comprehend clear-cut instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively communicate and work successfully with other employees at all levels in the organization.

PERSONAL QUALITIES
You should be able to stand for extended periods, bend, stoop, crouch, reach and kneel. You can not be bothered by sawdust, paint, lacquer, varnish, or polyurethane. You should like to learn new things. You must have a keen eye for detail (either naturally or assisted through glasses or contacts) with outstanding manual dexterity

WORK ENVIRONMENT:
You will work indoors. While performing the duties of this job, you may be exposed to fumes, airborne particles and chemical solvents. The noise level in the work environment is usually moderate.

Lapper Polisher (NE Austin)

Semiconductor Business:
Looking for experience Lapper/Polisher to operate Double Side Speedfam Machine.
Specialize in quartz and ceramic polishing.

Email Resume or fax to:512-933-9282

CNC Lathe Programmer/Machinist (Leander, Texas)

Lathes / CNC Turning Center lead setup tech needed.
We're looking for someone that lives, breathes, and programs turning.
We run hundreds of our own small components in our OEM captive machine shop
on numerous Cadet-sized Okumas & Citizen CNC screw machines
that need to run and never stop. Benefits, competitive pay, great work environment.
Accepting resumes with broad and excellent turning experience.
Email resumes

Machine Operator (Braker/Metric)

We are seeking a very reliable person for a 2nd shift position who will be operating a Mail Inserter Machine. 3 weeks of training will be provided.
This is a Temp to Hire position with benefits upon Perm status. Temp to Hire period is approx 3 months.

Duties will include: following written and verbal instructions in the programming of various Job Orders throughout each shift.



Requirements: Must be capable of paying attention to detail at all times, should have previous experience working in a fast paced manufacturing envinronment, must be willing to work as a team member and alone,
must be capable of lifting 25lbs on a regular basis and up to 50lbs occasionly, must be able to stand during an 8 hour shift.
MUST HAVE A CLEAN CRIMINAL BACKGROUND (no felonies or misdemeanors).
MUST PASS A DRUG SCREEN.
Must have a High School Diploma or GED.

Position is available immediately!
Hours: 2:30p -11pm (10:30am - 7pm during 3 week training).

Please respond with a resume.

CNC Operator (Leander)

CNC Operator/Setup person needed to setup and operate Haas CNC machining centers. Applicants should be able to interpret part drawings, inspect parts using calipers and micrometers , set tools, fixture parts for machining and adjust speeds and feeds.

SCM Director (Austin)

Minimum Requirements
• Bachelors degree
• At least ten years of SCM experience, including extensive experience with aerospace and/or defense products
• Working knowledge of Syteline MRP system
• Must be eligible for U.S. Government Security Clearance
• Extensive knowledge of an electronic manufacturing environment
• In-depth knowledge and understanding of supply chain management, distribution methods, and global transportation services and inventory management
• Good understanding of IT concepts and integrated business applications
• Strong knowledge in all areas of import/export, regulatory and logistics management
Please send résumé only if you meet all requirements.

Press Helper (Smithville TX)

Assists printing pressman in printing designs on paper. Loads paper onto the machine, washes rollers and helps put ink into machine. Keeps records, tracks inventory, helps maintain supplies, works with solvents. Uses cutter and protects paper to prevent press mishaps. Takes direction from pressman. Usual work schedule is 4 days, 10 hours per day. Must be able to lift 40 lbs repetitively. Helps to have a keen eye for detail. Prefer general mechanical interest/backgroud.

Materials Specialist (CEDAR CREEK)

Immediately seeking a Materials Specialist for a 9-month contract with long-term employment opportunities at a biomanufacturing company in CEDAR CREEK, TX. (Not Cedar Park) Please note that Cedar Creek is 14 miles EAST of Austin Bergstrom Airport - almost to Bastrop. If this is a commute you would not be interested in, please do not apply.


Essential Duties and Responsibilities:
• Experience working on special projects related to warehouse and logistics workflow with little to no supervision.
• Experience working with spreadsheets, work instructions and other various software packages.
• Experience working with SAP and Radio Frequency scan guns.
• Consistently perform cycle count, pick pack and ship accuracy at the meets expectations performance level.
• Reads work order or follows oral instructions to ascertain materials or containers to be moved.
• Pick, pack and ship all manner of material accurately.
• Ability to understand and follow written work instructions counts, weights and records number of units or materials moved or handled in MRP system.
• Transfers material from storage or work sites to designated areas both physically and systematically.
• Secures lifting attachments to materials and transfers loads to destination.
• Attaches identifying tags or labels to materials or marks information on cases, bales or other containers.
• Stacks or assembles materials into bundles and bands bundles together.
• Lifts heavy objects by hand or with power hoist. Cleans work area, machines and equipment.
• Operates industrial truck or electric hoist.


Job Requirements:
• High school diploma or general education degree (GED); and two (2) years related experiences and/training.
• Ability to demonstrate an understanding at a level that may include addition, subtraction, multiplication and division in all units of measure using whole numbers, common fractions and decimals.
• Ability to demonstrate an understanding of reading, inputting and creating spreadsheets in Excel for department metric tracking and process improvement.
• Ability to demonstrate interpersonal skills in dealing with a diverse set of individuals cross functionally while independently meeting stated objectives.
• Ability to read and interpret at a level that may include documents such as safety rules, work instructions and procedural manuals.
• Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form.
• Forklift Operator Certification, required within 90 days.


Physical demands:
• While performing the duties of this job, the employee is regularly required to stand, walk, reach with hand and arms, sit, climb, balance or stoop, kneel, crouch or crawl, regularly lift and/or move up to 15 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required include accurate close vision, distance vision and depth perception.

Schedule:
Monday - Friday, hours vary between 7am - 7pm. Some OT may be required.


If interested in the position and location, please send a copy of your resume in Word format.

Buyer Planner (Tualatin, Oregon)

Do you want to work in the beautiful Pacific Northwest? Novellus has an immediate need for a Buyer / Planner to join our team in Tualatin, Oregon. (Tualatin is a Portland suburb.)

The Buyer / Planner is responsible for monitoring the overall movement of materials through the production cycle in order to strategically plan and schedule how much material is required, when it is required and where it is required. Multiple positions available, one of which requires experience in the purchase of highly complex machined products.

Primary Duties and Responsibilities
• Purchase materials, components and equipment using engineering and production schedules
• Maintain inventory at planned levels at all times
• Gather quotations, evaluate bids and make awards
• Develop specifications for new contract orders
• Evaluate vendor reliability, develop new supply sources where vendors and suppliers are inadequate
• Monitor cost, schedule and scope of assigned subcontracts to assure best quality at best value
• Resolve a wide range of issues in imaginative as well as practical ways
• Work on problems of diverse scope where analysis of data requires evaluation of identifiable factors
• Demonstrates good judgment in selection methods and techniques with a focus on time-bound deliverables

Minimum Job Qualifications/Experience/Requirements
• Bachelor’s degree in business or technical discipline
• Minimum 5 years experience as a Buyer in the same or similar industry
• Advanced experience with MRP, preference for SAP
• Experience in a low volume, high mix manufacturing environment
• Strong preference for experience with semiconductor capital equipment
• Effective negotiation skills
• Excellent communication skills, both written and verbal
• Ability to interact with senior level internal and external personnel
• Ability to function effectively in a fast-paced environment

Relocation will not be provided.

Novellus designs, manufactures and sells cutting edge semiconductor equipment. Our local campus in Tualatin is part of a global network of offices in 16 countries that supports our US and international semiconductor customers. Founded in 1984, we employee approximately 2,400 personnel worldwide and we are traded on the Nasdaq as NVLS. Learn more at www.novellus.com

HOW TO APPLY
For immediate consideration, please apply online at www.novellus.com/careers

moldmaker/machinist (central austin)

Moldmaker/machinist wanted. minimum 5 yrs. exp. Mastercam exp./ HAAS CNC mill exp. preferred
Fax resume to 512-472-1322 Attn: Gene

Cleanroom Supervisor (Round Rock)

National leading cleanroom laundry company is in need of a cleanroom supervisor to oversee soil sort, washing, folding, distributing, and shipping departments. 2 years previous supervisory experience required and must be able to communicate in English and Spanish. Must be willing to work shift work (typically 5am to 2 pm sometimes later as needed), some weekends, and possible holidays. Company offers competative wages, oppurtunities for advancement, 100% company paid health insurance and prescription drug plan, matching 401k, profit sharing, paid holidays, 1 week vacation after 1 year and 2 weeks vacation after 2 years, and tuition reimbursement.

Delivery Driver Helpers Needed (Austin)

Company seeking two temp. delivery driver helpers for distribution of copy machines. Location is Waterford Centre Blvd.
Interested applicants foward resume to vdeliz@bbmonline.net

CNC Mill Machinist/Programmer (Austin)

CNC Mill Machinist / Programmer . Minimum 5 years experience. Must be able to Setup and Operate with Fanuc Controls.
Must know MasterCam Programming. Day Shift (Monday - Friday)
Benefits include: Health Insurance, 401k, paid vacation and holidays.
Call (512) 927-0033 ext. 110
Fax (512) 927-0122
Email: jheadrick@commandmfg.com

Production Grit Blaster/ Helper (Leander, Texas)

This position requires mechanical aptitude, the ability to follow instructions, dexterity and the ability to lift up to 75 Lbs. Duties will include Grit blasting, de-burring, heat treating, grinding, painting and additional responsibilities to be assigned as necessary. Regular hours are between 8:00 A.M. and 5:00 P.M. with occasional overtime and weekend work required. This is a great place to work, we have relaxed atmosphere but a keen sense of urgency when things need to get done. If you are energetic and this sounds like a job for you, we'd like to hear from you. Send Resume to the contact email above. (Slackers, Texters, and lazy people need not apply)

Printing Operator--Assembly (North Austin)

Summary: Provide services to support the printing department according to written specifications.

Key Responsibilities, to include, but not limited to the following:
1.Develop skills to work in a repetitious environment
2.Able to lift up to 50lbs and stand on feet for eight hours
3.Develop skills to handle printed material, assemblies, subassemblies and modules by working from samples, visual aids, prints, and diagrams, routing instructions and
process sheets using appropriate tooling.
4.Be able to work with chemical such as: HCL, NOAH, Inks, and cleaning chemicals.
5.Responsible for quality control. Make adjustments as necessary to produce product within specifications. Reject product outside of specifications.
6.Performs continues work maintenance and inspection on the Etch machine.
7.Coordinates incoming and work in process material (glass) through the glass wash equipment, in accordance with established procedures and guidelines.
8.Coordinates incoming material (glass, film, and poly) to the printer manufacturing lines, in accordance with established procedures and guidelines.
9.Be able to work with chemical such as: Inks, Ink thinners, and screen wash chemicals
10.Be able to operate a printing press and continuously inspect the product
11.Inspects glass and film materials in accordance with established procedures and guidelines
12.Transport material from printer equipment to oven
13.Keep printer personal supply with film or glass
14.Read, understand, and maintain compliance with all documented quality requirements.
15.Develop skills to work closely with engineering in new product or process improvements.
16.Reads and interprets work instructions and diagrams to perform the job
17.Clean and maintain work area.
18.Other duties as assigned.

Experience, Knowledge, and Duties:

1.High School Diploma or GED
2.1-3 Years experience in a high-tech manufacturing environment assembling electro-mechanical components.
3.Ability to use MS Word/ Excel / and Access Data Base
4.Must have good written and oral communication skills (English)
5.Understand clean room standard concepts, practices, and procedures.
6.Ability to read process sheets, prints or route cards
7.Must be able to stay on task and be self-motivating
8.Must be able to work under minimum supervision
9.Must be high detail oriented
10.Hours per Week: 40 and able to work overtime as needed
11.Minimal knowledge of 5S concepts
12.Must be to work in a team environment
13.Familiar with ISO and environmental standards

Packing/ Shipping Associate (Northeast Austin)

Immediately seeking a Packing/ Shipping Associate for a contract position in a Northeast Austin warehouse.

This warehouse processes a high volume of orders daily, weekly & monthly. Operators assigned to the warehouse are expected to perform in a manner befitting this type of work environment. This means an emphasis on accuracy, efficiency & quality at all times.

Lifting: warehouse operators should be capable of lifting loads up to 35lbs on a regular basis & loads up to 55lbs occasionally.

Packing: warehouse operators are expected to package product accurately & efficiently. This includes single bagging products within the established specified cycle times. Warehouse operators should be capable of packaging 100 units per hour with labeling.

Schedule: Monday - Friday 8am - 4:30pm OR 9am - 6pm

Requirements:
- At least 2 years of shipping/packing experience
- Good job tenure
- Able to submit to background and drug screenings.


If interested and qualified, please submit your resume in Word today! Interviewing immediately!

Screen Print Manager (North Austin)

This Screen Printing Manager will be a key member of our Screen Printing Department. This position will lead the rest of the screen printing staff in achieving the goal of running a highly efficient and profitable department. We are looking for an upbeat hard worker who can jump right in. Previous personnel management required. Extensive experience in screen printing operations and machinery as well as familiarity with design applications and vector file re-creations is required!
Making our signs requires being active for the duration of the workday, a very careful hand and eye, and ability to stay on task. Innovative idea suggestions and solutions for improving our work flow and integrating our production processes are expected and encouraged.

Primary Responsibilities:
• Effective operational and personnel management of an established efficient production system while continuously looking for ways to improve established system
• Maintaining and accounting for accurate inventory

Secondary Responsibilities:
• Efficient operation of the screen printing press to maximize daily output, including minimizing press down time and materials waste.
• Output signs that meet quality standards
• Assisting in all aspects of the screen reclamation and preparation process (file separations and film output, inspecting file and proper screen exposure, screen coating, screen dehazing and degreasing)
• Receiving and inspecting raw materials
• Maintaining and accounting for inventory
• Boxing up finished product for shipment

These qualifications are required:
• Advanced knowledge of Adobe Illustrator and vectorizing files
• Heavy experience with processing orders with various vector file formats
• Expert knowledge of the file processing cycle in screen printing production including; color matching, color separation, file vectorizing, etc
• Physical stamina sufficient to stand during entire shift, excluding rest breaks
• Ability to communicate effectively with team members
• Ability to work with minimal supervision
• Problem-solving and troubleshooting initiative
• Must have availability for occasional evening and weekend hours

What we’re like:
• Fast growing, self-funded, profitable startup in Austin
• Disruptors in our industry- innovation and creativity are our mainstays
• Hard-working and fun-loving

Benefits:
• Medical/Dental/LTD/Life and Vision Insurance, Paid Time Off, Paid Holidays, 401(k), Profit Sharing Plan
• Compensation: Competitive (commensurate with experience)

To Apply:
• Please fill out our online application at www.buildasign.com/careers.

BuildASign.com is one of the fastest growing and most exciting startups in Austin. Completely bootstrapped from our founding in 2005, we've grown to over 60 employees and well over 10 Million in revenue in a little over 3 years. Our plan? World sign domination. Our motto? Have fun while working hard. Voted one of the Best Places to Work in Austin by the ABJ two years running, BuildASign.com offers extremely competitive benefits including 99% paid health benefits, a 401(k) with employer match, and a profit sharing plan for all employees.

Production Project Manager (North Austin)

Are you interested in leading our Production facility to a new level of efficiency and productivity? BuildASign.com is growing at alarming rates as a direct result of sales. We are constantly adding to our product line in an attempt to be a one stop shop for our customers. What this means, is that we are constantly evaluating and improving upon current production processes, as well as developing new process to account for additions to our product suite. BuildASign.com is currently looking for a Production Project Manager who can lead the changes and developments necessary within our production facility. We are striving for efficiency and innovation, so we need someone with strong analytical and problem-solving abilities. It is important that our Production Project Manager constantly evaluate our production process from new perspectives so as to keep the department growing.


What you’ll be working on:

• Implementing continuous improvement projects
• Researching and identifying future improvements to our current production process
• Training employees on the changes to current processes
• Researching and implementing new production processes for additions to the BuilASign.com product line
• Training employees on the new processes to facilitate efficient and effective start ups of new production lines
• Utilizing departments internal to BuildASign.com (Market Development, Research and Technology, Graphics, Customer Service) for necessary support on all projects

Job Requirements:

• Excellent problem solving skills
• Excellent written and verbal communication skills
• Ability to work on multiple projects in parallel
• Ability to work with multiple parties and different specialties to ensure successful implementation of projects
• Detail oriented
• Excellent time-management skills
• Excellent analytical skills
• Ability to teach and train co-workers
• Experience with Excel

Qualifications:

• 2 years project management experience
• Experience in the sign industry or manufacturing atmosphere

What we’re like:

• Fast growing, self-funded, profitable startup in Austin
• Disruptors in our industry - innovation and creativity are our mainstays
• Hard-working and fun-loving

Compensation and Benefits:

• Compensation: Very Competitive (commensurate with experience)
• Medical, Dental, LTD, Life, and Vision Insurance
• 401(K) Plan
• Paid Time Off/ Paid Holidays
• Profit Sharing Plan


To Apply:

Please submit your cover letter, resume and salary requirements at www.buildasign.com/careers.


About Us:

BuildASign.com® is a new kind of company. BuildASign.com integrates experience with innovation to form one of today’s premiere e-commerce companies. We are revolutionizing production while incorporating the latest in e-commerce technology and aggressive business techniques to produce faster, smarter, and more creative solutions for our customers. Our philosophy of creativity, innovation, and professionalism extends to our employees, making BuildASign a fantastic place to work.

CNC PROGRAMMER/MACHINIST - CNC PROGRAMADOR/TORNERO

SEEKING CNC PROGRAMMER/MACHINIST WITH AT LEAST 10-15 YEARS EXP.
NEED SOMEONE TO PROGRAM/RUN A NEW DAEWOO PUMA-400LM, 21 INCH CHUCK,
LIVE TOOLING.
MUST KNOW FANUC CONTROL, CANNED, THREAD CYCLES ETC.
FAMILIAR WITH OIL FIELD THREADS.
WE HAVE MASTERCAM X3 IF NEEDED TO DO PROGRAMMING.
IF YOU DO NOT MEET THESE REQUIREMENTS, PLEASE DO NOT REPLY.

PAY DOE.

SE SOLICITA CNC PROGRAMADOR/TORNERO CON POR LO MENOS 10-15 AñOS DE EXPERIENCIA.
SE SOLICITA A ALGUIEN QUE PROGRAME Y OPERE UNA NUEVA DAEWOO PUMA-400LM, 21 INCH CHUCK,
LIVE TOOLING.
CONOCIMIENTO DE FANUC CONTROL, CANNED, THREADING CICLOS.
CONOCIMIENTO EN ROSCAS PETROLERAS.
TENEMOS MASTERCAM X3 PARA LA PROGRAMACION SI ES NECESARIO.
PROGRAMACION MANUAL ES ACEPTABLE SI USTED ES EFICAZ.
FAVOR DE NO APLICAR SI USTED NO CUMPLE CON ESTOS REQUISITOS.

SALARIO DEPENDIENDO DE EXPERIENCIA.

Rotary Vane and Dry Pump Repair Technician (Round Rock Area)

Growing vacuum pump service company seeks an experienced dry pump and rotary vane repair technician. Job will be temp to hire, and possible PT to FT. Should have experience with disassembly and/or assembly Leybold, Edwards, Alcatel and Varian rotary vane pumps, as well as Edwards and Ebara Dry Pumps. Experience with Scroll Pumps a plus.

Must work quickly with a low level of rework and be very dependable.

Reply with resume or brief work history in email.

Assembler Needed For Manufacturing Company (South Austin)

Assembler needed for manufacturing company. Must have mechanical ability, and be good at working with your hands. Steady work (Mon - Fri), good pay, room for advancement. Please email resume.

Maintenance Manager (Lockhart, Texas)

Manage maintenance department for a manufacturing facility located inside a prison.
Must have strong mechanical PM skills, strong in electronics including trouble-shooting and
programming PLC’s. Must pass a background check and drug screen.
Pay commiserates with experience.

Contact: (Jack) email: jhill@hcontrols.com
Henderson Controls
PO Box 60
Lockhart, TX 78644