- pulverizer (bakersfield) $900
- Electric fine rock grinder works great includes electric motor and stand used only 50 approx. hours paid over 1200.00 plus motor and controller.
- Diehard battery pack/jump starter (SW Bak) $30
- Retails for $119 or there about but is a few years old. Its only been used a hand full of times. Super handy though. Thanks for reading.
- Dewalt Rotary Laser Level (southwest bakersfield) $260
- Dewalt rotary laser level. Includes tripod. Excellent condition. Used only a few times on one job.
Call or text show contact info Local pickup and cash only.
- Heavy Duty Engine Stand and Hydraulic Engine Hoist (Neenach/West Lancaster) $225
- Torin Big Red 2-Ton Hydraulic Engine Hoist AND Torin Big Red 750lbs Heavy Duty Engine Stand. $225 FOR BOTH, cash only.
Pickup in Neenach, 60 miles south of Bakersfield. (15 minutes east of Gorman off of highway 138). Call show contact info
- Scrap Copper, Brass, Stainless, and Aluminum (Bakersfield) $100
- I have around probably close to 60lbs of scrap copper wire, copper, stainless, brass, And aluminum. I don't have a vehicle or the time to go turn it into the scrap yard myself and I really need the money for it right now so if your interested in buyi [...]
- 12 1/2" Commercial Craftsman Planer/Molder (southwest bakersfield) $275
- 12 1/2" Commercial Craftsman Planer/ Molder with stand. Used only a few times. Very good condition.
Call or text show contact info Local pickup and cash only.
- Big Vice ... (bakersfield) $100
- Big vice on metal table......
- Vangaurd 9 horse w/clutch (bakersfield) $175
- Vanguard 9 horse with clutch.....Runs Good....with big clutch!!
- Tile Saw!! (bakersfield) $100
- Tile Saw with stand ....
- CRAFTSMAN 2.0 Amp Sander & 1.6 Amp (EastBakersfield B) $10
- Have Craftsman 2.0 Amp sander in good working condition asking $20
And Black & Decker 1.6 Amp for $10 Call or text at show contact info
- BLACK & DECKER JIG SAW (EastBakersfield B) $10
- I have a Black & Decker 2.2 amp jig saw in good working condition asking $10
And a SKIL 3.2 jig saw for 10 call or text at show contact info
- SKILSAW 7 1/4 IN. CIRCULAR SAW (EAST BAKERSFIELD ) $25
- I have a Skilsaw 7 1/4 Circular saw for $25 both in great working condition call at
- Tools saw (southwest)
- Tools saw like new $50
- Oxtgen and Acetylene Bottle (southwest bakersfield) $425
- 100 CF --Acetylene Bottle --just filled 8-18-14--tank stamped 7-14 --new valve--good as a new $165---280 CF--Oxygen Bottle--just filled 8-18-14--tank stamped 12-12--new valve--$275--You own the bottles--no rent $425 for both
- SKILSAW 2.3 WORKS GOOD (NE BAKERSFIELD) $45
show contact info THANKS
- DREMEL 3000 VARIABLE SPEED 31 PIECE BRAND NEW (NE BAKERSFIELD) $40
- SELLING A BRAND NEW DREMEL TOOL THAT HAS NEVER BEEN USED OR OPENED. I ORIGINALLY BOUGHT 2 A FEW MONTHS AGO FOR $75 EACH BUT ONLY OPENED 1, IM ASKING $40.00 DOLLARS FIRM CASH. WHICH IS SAVING YOU $35 IT IS A 31 PIECE VARIABLE SPEED DREMEL 3000 THAT IS [...]
- s& d drill bits full set (bakersfield) $20
- full set s&d drill bits good shape 20.00 call bill
- 3 drawer tool box (bakersfield) $20
- 3 drawer tool box 20 argon reg oxy reg rv pump s&d drill bits good shape some new all in pics for 60.00 call bill
- Coleman Powermate Sport 1600 Portable Generator (Tehachapi) $149
- Runs great, I back it with a 30 day warranty.
For sale at my store in Tehachapi. Email or text for more info.
- Remington 14" Electric Chainsaw, $40. TEXT
- Sockets Pliers Wrenches Screwdrivers
- Have a bunch of pliers, wrenches, sockets, and screwdrivers, $150 for all, TEXT
- 500 ft of Rope
- Have approx 500ft of 3/4" diameter twisted rope, $200. Text
- 21 pc 3/4" Socket Set
- 21 piece 3/4" socket set. $60
- Brand New Air Curtain
- Brand new in box, 59" Air Curtain, $240, TEXT
- Tool Box w/ Tools $600
- Heavy duty toolbox loaded w/ tools. Sockets ranging from 1/4" to 1" drive. Some brands included are Snap On, Proto, Williams, Craftsman. Some include lifetime warranty. Also has a Wilton vise $600 for EVERYTHING, TEXT
- heavy duty truck tools, wren [...]
- Radius Track Bender
- Radius Track Bender, model S150, used to bend metal
S150 20 and 25 Gauge Material 2 1/2" to 6" wide track or studs Leg length up to 1 5/8" high Minimum Radius 2 1/2" Material: Approximately 13" Minimum Radius with 2" spacing 3 1/2" - 4" Materi [...]
- coleman 4200 generator (taft bakersfield) $275
- I have a Coleman generator works great. Located in Taft will travel or meet halfway call/text
show contact info $275 "This unit is powered by a 7.8 HP OHV Generac engine. The specs are as follows: Rated Max. Power 4200 Watts Surge Power 5000 Watts Rated A [...]
- Service Trailer
- Service trailer for sale, $3000 text
- Solder 50/50 plus gun and stick (Southwest) $85
- 50/50 flux solder 15 1lbs. Spools retail value at $19.95 each value of over $200.00 great deal selling for $85.00 with solder stick industrial equipment call Steve 661388one99seven
- Winch Strap
- Liftall web strap, winch, sewn eye, 27ft long, 4" wide, 5000 lb load capacity, 15,000 lbs. breaking strength. Have 7 of these, $40/each. Bought from Grainger. TEXT
- DeWalt 18V Cordless Sawzall + battery + Charger (Tehachapi) $60
- Works great with 30 day warranty, battery holds a charge and runs strong.
For sale at my store in Tehachapi. Email or text for more info.
- Ramset gun with loads and pins (Southwest) $45
- Ramset gun with loads and pins $45.00 call Steve 661388one99seven
- Sharpe paint gun for auto body and airbrush (Southwest) $55
- Sharpe paint gun platinum with regulator and hopper very good condition asking $55.00 call Steve 661388one99seven
- Heavy duty chain (Southwest ) $35
- Heavy duty chain retail is $3.25 ft. And it's a 25 ft. Chain strongest links great for towing and lift has two hook ends $35.00 call Steve 661388one99seven
- Pickle beveler (Bakersfield) $600
- I have a nice pickle 2 beveler 4 to 24 $600 bucks hit me up for pics
- Miller 12vs (Bakersfield) $1200
- Have a brand new miller suitcase 12vs used one time ready to work has hose gauges everything with a spool of wire $1200 hit me up for pics no bs
- 10" Radial Arm Saw (Ridgecrest Inyokern) $75
- 10" blade radial arm saw. Works Well and is fast. I have some extra blades to go with it. Also have a 10" table saw in another add. They would make a great pair. Please locate Ridgecrest before concidering. Bakersfield is the closest big city.
- 8 Adult size orange safety vests
- Have 8 brand new adult size safety vests, $5/ea
- 7pc Longhandle Wrench Set
- Pittsburg 7 pc longhandle wrench set, lifetime warranty. $15 TEXT
- Electric Panel
- Never used 200 watt electrical panel, $150. Text
- Socket set
- Socket set $10 text
- I have 5 socket racks, 3 are 1/2in, and can hold 14 sockets each. The other 2 are 1/4in, and can hold 16 sockets each. $10/ea.
- 10" table saw (Ridecrest Inyokern) $75
- 10" Craftsman table saw. Good working condition. I also have a 10" Radial arm saw that would make a good pair. Please locate Ridgecrest, CA before concidering. Bakersfield is the closet big city.
- Air Drill Attachment
- Buckeye Tools Air Drill attachment, $40 TEXT
- Brand new 40" docklight
- Brand new Fostoria 40" Reach w/ Lamp, brand new in box $225, TEXT
- Husky diamond plate full size truck tool box (Douglas st) $75
- HUSKY diamond plate, full size, truck tool box!
I've just been using this as storage so it needs to go! 70in length x 61in in between x 21in width x 17in depth
- Variety of Sockets
- 1/4" socket set, 3/8" socket set, 3/4" impact socket set, and a 3/8" impact socket set. $35 for all, TEXT
- Airless Paint Sprayer
- Powr Twin 8900 XLT sprayer w/ brand new motor, $4200 TEXT
- Makita cordless drill set $50
- 9.6 volt drill model 6095D. keyless chuck.
2 working Ni-MHbatteries, model 9033, 2.2 ah. charger model DC1411 is compatible with Ni-MH or Ni-cad batteries for 7.2V, 9.6V, 12V, or 14.4V.
- Body Harness
- Web device 200 series, plus body harness. Have 3 of these. $40/ea. TEXT
- Air Chisels
- Have a lot of air chisel bits and springs. All for $35 TEXT
- Heavy duty toolbox w/ vise, $225 Text
- South Bend Lathe
- South Bend Lathe spanner wrench $80 TEXT
- Pipe Wrenches
- Ridgid 18" and 24" Pipe Wrenches, $30/ea. TEXT
- Shop welder 220 arc/tig with pedal (linde) no bottle (Bakersfield ) $1000
- Call 661-889-045nine
- Wet/Dry Shop Vac (sw bakersfield) $20
- Stinger 2.5 Gallon Wet/Dry Shop Vac Works perfect, in great condition, never used as a wet vac only 6 months old. $20
- craftsman tool chest and compressor $1
- tool chest full of tools mostly craftsman... $350 o.b.o. .. craftsman air compressor with 30 ft hose reel $200o.b.o. ..
- BRAND NEW TOOLS (NOR)
- Selling Brand new tools. I have new magnetic screw holder, headlamp, tape measure and flashlight.
EVERYTHING FOR $20. Please call show contact info
- GENERATOR Coleman PowerMate Maxa 3000 (Bakersfield, CA) $255
- Damn near brand new! Very low hours, in great condition. Starts up immediately, and comes WITH A FULL TANK OF GAS. 120 volt/3000 watts/two outlets. Dependable and solid. $275/OBO.
- Westward Air Diegrinder (Bakersfield) $50
- Selling my gently used Westward Tools Air Diegrinder kit. Comes with case and bits. Selling because im in financial distress. text perferred.
- Brand new 'Lubrication Engineers' Clear Grease gun (Bakersfield) $40
- Im selling a Lubrication Egineers's grease gun. Its never been used and has a clear tube with red trim. comes with straight tube and flex hose. Im selling because im in extreme financial distress needing to pay PG&E to restore power. thank you. text [...]
- BlackHawk Dynamic Entry Tactical Bolt Cutters (Bakersfield) $50
- I have my Blackhawk Dynamic Entry Tactical Bolt Cutters up for sale. This cutters are bad-ass. Have to sell because Im in extreme financial distress and have to pay PG&E to get power restored TODAY. text is preferred. thanks.
- Jobmaster tool chest (bakersfield) $200
- Jobmaster, storagemaster model number 69. Lockable storage chest in good condition needs paint job. Also have tools, misc for sale. 661-204 148seven Tori $200 obo over
- blue point tool cart (bakersfield ) $600
- I have my blue point red 3 drawers tool cart working 100% no dent or bents at all im asking 600 make me an offer go for up to 1200 in snap on truck it lock with 2 keys call me or txt for pictures local pick up
show contact info no tools included
- Pump Spray Bottles (sw bakersfield) $5
- 2 Pump Bottles with hose and spray wands attached, bottles are 1 gal. asking $5 for both
- superchips programmer (sw bakersfield) $200
- 1805 flashpaq tuner 99-07 ford powerstroke 7.3 & 6.0
sold truck, do not need anymore.
- Cemint mixer $100
- Good working mixer to 80 pound bags at one time runs on 110 volt $100
- Professional Cordless staple gun Brand New (Bakersfield)
- New. selling for $70. bought for 3 times that. call text only
show contact info NOT impact wrench driver compressor generator power pneumatic lift jack saw jig storage tool box Dewalt Milwaukee craftsman charger starter sander drill press tools set grinde [...]
- miller thunderbolt welder (s.w.bakersfield) $165
- miller thunbolt welder 220 volt has 60 foot plug and 20foot leed 619-4398
- Hammer head tool box (Bakersfield) $600
- Hammerhead rollaway 63 inches tall by 42 inches wide like new must see call
- Ohaus Triple Beam Balance Scale (Oildale) $35
- Ohaus Triple Beam Balance Scale. Max weight 2610 grams. Works great. Very precise. I'm asking $35 oboor text Kevin
- .............2 FLOOR JACKS,,
- 5,000 LBS.....& 3,000 LBS..
BOTH WORK GOOD 85$ show contact info
- MARBLE PUB / BAR / BISTRO STYLE TABLE & 2 LEATHER CHAIRS (N/W BAKERSFIELD) $120
- VERY HEAVY MARBLE TOP TABLE 3'-4" ACROSS X 3'-0" HIGH --- BLACKISH BROWN BUTTON TUCK CHAIRS 3'-4" TALL X 1'-7" WIDE X 2'-1" DEEP --- SET COST OVER $400
- MCLANE FRONT THROW REEL MOWER (N/W BAKERSFIELD) $95
- USED 17" MCLANE FRONT THROW EASY PUSH MOWER --- 2
- Honda generator EB3800X (Bakersfield) $1200
- Runs great
Just serviced Commercial grade Only about 15-20 hrs on it Paid close to 3k for it 1200.00 obo. Will consider trade of equal or greater value
- 7.8 HP GENERATOR 4000 WATT ** 120 / 240 VOLTS & 12 VOLTS DC (N/W BAKERSFIELD) $165
- RUNS GREAT --- STARTS ON FIRST OR SECOND PULL --- GENERAC 4000 XL --- 7.8
- Fume Master Ventilator LM-8/F-M-C Cincinnati Fan and Ventilators (Bakersfield) $150
- I used this ventilator in my glass blowing business. It has a 3/4hp industrial motor and I believe it is rated around 1600cfm air flow and can take high temperatures. It connects with 8 inch ducting. I paid well over $1000 for it new and am tired of [...]
- Hilti TE 56 roto hammer drill (Rosedale)
- Hilti te 56 rotary drill and demo hammer. Used twice to remove kitchen tile. Worked great. Won't find one cleaner or nicer.
Comes with one chisel bit and dust cover. Soft handle removable M A K E. O F F E R .
- 220v Craftsman air compressor (Bakersfield ) $150
- 5 HP, 30 gallon. Works perfectly, only reason I am selling is because I have a smaller one that I use more! Please call sixsixone37849eleven
- UST UG 3000 GAS GENERATOR $250
- Generator used on a couple of jobs. Been garaged for a while.
- rolling/portable fork lift (bakersfield) $600
- Rolling portable forklift genie gl 10 350 lbs limit good shape pickup only
- NEW SUREFIRE M952 LIGHT $265
- NEW SUREFIRE M952 LIGHT
THIS MODEL HAS QUICK RELEASES . IR SCREEN , REMOTE SWITCH, AND EXTRA BULB JUST OPENED TO TAKE PICTURES. $265 show contact info LOCATED IN BAKERSFIELD
- Craftsman tool box
- $700 obo
Call/text show contact info
- STANLEY MOBILE JOB BOX (South Bakersfield) $45
- Used 35" stanley mobile job box in ok condition just needs to be cleaned. Contact # 863-eightonethreeone
- Baldor 1.5 HP Electric Motor (southwest bakersfield) $125
- Baldor Industrial Motor 1.5 HP--115/230 volts--20/10 amps--1725 RPM--60 HZ--1 Phase--5/8" shaft--wired for 115--works great
- WORK STATION (South Bakersfield) $140
- Used work station. (661) 8six3-eight1three1
- KNAACK TOOL BOX (South Bakersfield) $220
- Used knaack tool box, 4 feet long 2 feet wide 2 feet deep. I also added four big wheels for easy hauling. (661) 863-eight1three1
- 4 Drawer File Cabinets (sw bakersfield) $40
- Good used file cabinets-drawers slide good. $40 each
- sprayforce spray rig (atascadero) $12000
- hurricane 350 dual tank spray rig by sprayforce used to spray acoustic, texture,brown coat,paint and more the rig was completely torn down and gone through and all necessary parts replaced, completely cleaned, sandblasted, and painted than put back t [...]
- Portable Saw Cart (sw bakersfield) $50
- Portable Saw or ??? Cart Easy to move and stable to work off--base is 22 1/2 x 20--top shelf is 12 x 20--saw not included
- Miter Saw 10" (sw bakersfield) $60
- Black and Decker 10" miter saw with good blade--works good
- HEAVY DUTY RIDGID PIPE WRENCH (South Bakersfield) $35
- Used 24" heavy duty ridgid. Contact
- HEAVY-DUTY MILWAUKEE (South Bakersfield) $120
- Brand New heavy duty Milwaukee drill 1/2" (13mm). (661) 8six3-eight1three1
- Welder older style Hobart (needs fuel pump) diesel motor full size rig (Bakersfield) $1500
- Call 661-889-045nine
- NAILS (South Bakersfield) $25
- Lots of 6inch nails.
- $$$LINCOLN SA-200 PORTABLE WELDER$$$ (ONTARIO) $4500
- LINCOLN SA-200 PORTABLE WELDER
COPPER WINDINGS PROPANE POWERED MOUNTED ON TRAILER (CAN BE REMOVED) NO LEEDS! NO LEEDS! LOTS OF NEW PARTS NEEDS OF FEW COSMETIC PARTS ASKING $4,500.00 OBO CONTACT INFO. ABOVE! CALL OR TEXT ONLY!!! THANK YOU!
- Black and Decker set (Tehachapi) $30
- I have an 18V Black and Decker set that comes with drill, circular saw and two batteries. Everything works excluding the charger. Charger stopped working on me so I can't charge the batteries. If you already have a charger then this is perfect for yo [...]
- Dayton Gearmotor 4.5rpm. 115v Good for BBQ Pit Rotissorie. (93314) $240
- Dayton gearmotor Model 6Z075. 100 inch pound torque. 1/80hp. 4.5rpm. 361:1 ratio. 1/2" shaft. Good for a custom BBQ rotissorie. Call
- Oil Rig Drill Bit $50
- Item will not be shipped
TRICONE OR TRI CONE ROLLER DRILL BIT.I TRIED MY BEST TO TAKE PICTURE AND SHOW AS MUCH DETAIL AS POSSIBLE BUT IF MORE ARE NEEDED FEEL FREE TO ASK. I WAS TOLD THAT IT IS A BIT. I DO NOT KNOW IF IT HAS BEEN REFURBED. CAN BE USE [...]
- Dayton Heated Pressure Washer Diesel / Kerosine (Tehachapi) $200
- Dayton heated pressure washer.
120V Diesel / Kerosine Needs new pump or repaired pump housing just reduced from $400 to $200 due to realizing pump housing is cracked come get this out of here!! 661 406 six 8 six three text or call ONLY NO EMA [...]