- Reel Mower Grinder (Fargo) $1500
- This is a complete setup for sharpening golf green type reel mowers in good working order. Call
- Ready heater Pro100 (Underwood mn) $100
- in excellent shape used for short time just don't need a heater that large
- airless paint sprayer (lisbon) $80
- Nice cambell hausfeld contractor grade airless sprayer with good length of hose just recently lost a little suction clean out the intake block and have you a nice sprayer!!
- router table with router (Moorhead,mn) $60
- home made table. has a counter top with removable plastic base. that the router is mounted to. adjustable fence. that a dust collector can attach to. it is on a base mounted with wheels. call or text
show contact info No Emails
- knack tool box (moorhead,mn) $400
- one year old and in good shape. fits good in back of a pickup. it measures 48" wide by 24" deep and 29" tall. It does have a lock too. call or text
show contact info no emails
- 6 clamps for sale or trade (mahnomen) $20
- I have 6 pcs set of clamps non name brand their is 2 of the 4",2 of the 6" and 2 of the 12". They work great I just dont use these as I need larger ones for most everything I build I would trade for other hand tools
- Scissor Jack With Wrench (Downtown Fargo) $5
- For sale is a used scissor jack. Both jack and wrench have the Chrysler/Dodge/Plymouth Pentastar.
Great thing about this jack is that it has a hex head on it so a socket can be used with a ratchet or impact. Price is $5 Call/Text Joe @ 218-329-964 [...]
- TAPE MEASURES (FARGO) $20
- All in working order. 20 bucks takes them all Call 701-four four six-6047
- SNAP ON STAINLESS TOP (FARGO) $700
- not 1 year old yet and has never been worked on
28 3/4 wide 72 3/4 long like new condition----this is for the top only!!! You can not buy the tool box for $750!! PLEASE READ call 701-four four six-6047
- SNAP ON TOOL BOX (FARGO) $900
- Snapon tool box new condition Call 701-four four six-6047-----TOOLS NOT INCLUDED
- drill bits (Wahpeton) $50
- I have 56 drill bits with a nice metal case. For less than a dollar apiece.
- wanted...pump jacks
- Hi, I am currently looking for a used pair of pump jacks . Must have safety net with the set. I will be using these for siding a house. Please contact me at
show contact info Thanks
- 9100 Speedglas Welding Hood (Mapleton) $220
- Used part time for about 3 months and then got moved to the office. Very clean nice hood. Have extra lens protectors and batteries also.
- Snap on Harley Davidson toolbox (West Fargo) $3500
- Snap on Limited edition Harley Davidson tool box 6ft tall 30" deep and 54 wide it does on the bottom box have some damage in the bottom left corner $4000 but the top box don't have any damage the same box used on eBay is $9000 70130 six 5609
- Snap On tool box (West fargo) $2000
- Very nice Snap On tool box in good condition $2000 70130six5609
- Lincoln 220 Welder (Fargo) $600
- Lincoln 20 welder with shown items...cash only please
- Sears air-compressor (Moorhead area) $175
- Sears two cyclinder air compressor. 230 v motor. 20 gal tank. 40' hose. Built in pressure regulator. Perfect condition. $175.00. Call
show contact info after 5:00 or leave a message.
- Wagner HVLP Painting System (Detroit Lakes) $20
- Wagner HVLP Overspray painting system. Indoor/Outdoor lock and go system. 350 Watt. Used only one time. $20. 218-8four4-5one98.
- I have a tool shop saw for sale paid 160 for it two years ago used it twice just dont need it anymore ill take the first 50 bucks for it
- Chicago Pnuematic Impact, Big, Model CP897 (west fargo) $175
- Chicago Pnuematic Impact, Very Big, Model CP897
What you need if you change tires on trucks or large equipment frequently.
- hg3500 homelite generator $400
- 3500 watt generator $400 obo
- Snap-On tool box (North Fargo) $500
- Snap-On tool box 27x20x38 good condition no major dings or scrapes. 7drawers
$500 or trade for 3 sets of scaffolding Please text with any questions about the Snap-On tool box.
- Set of Van Shelving (Spicer) $500
- Has never been used. The set came in a new cargo van that we are using for a different purpose, so we removed the shelving. Heavy duty stuff. It takes two people to lift. The set retails for well over $2,000. Brand is "Leggett and Platt."
See this l [...]
- Eagle Large Vehicle Pass (Detroit Lakes) $200
- I have a Large Vehicle Pass for Eagle campground for sale. $200 or best offer. Selling for my cousin who is not able to make it.
- Air Compressor (Fargo) $400
- Year old 5 horse 60 gallon stand up air compressor.. Wired for 220 PSI is 130.
12.3 CFM @40 10.3CFM@ 90 3.1 RHP $400.00 or best offer Industrial Air is the brand name show contact info $400.00 or best Offer
- Bosch 12" electric chop saw (Park River, ND) $150
- 12" Bosch electric chop saw. Works great. Call or text.
- Electric concrete screed (Park River) $250
- Screedmatic electric concrete screed. Just attached to screed board. Makes it a lot easier and gives you a much smoother finish! Call or text.
- LARGE WHEELER CHAIN PIPE CUTTER (Moorhead, MN) $60
- Wheeler chain stlye pipe cutter. It measures 43" long. Chain links say ACME 14 USA. I do not know much about these so please ask questions if you need more information.
- 2 Craftsmen table saws (West Fargo) $100
- 2 10inch craftsmen table saws for sale. $100/each Call
- 12" Craftsmen Band Saw (West Fargo) $100
- 12" Craftsmen Band saw. $100 Call
- Craftsmen Radial Arm Saw (West Fargo) $100
- 10" Craftsmen Radial Arm Saw. $100 Call
- Graco industrial hose reels (wahpeton)
- selling 2 graco hose reels, both have hoses and older dial type metering nozzles. reels works great, paint is good. asking $100 piece. call 701-six four 0- 8 six 09
- STREAMLIGHT RECHARGEABLE (FARGO) $50
- Streamlight rechargeable with charger good condition. Call 701-four four six-6047
- New Knaack Jobmaster Chest #4830 (Mahnomen MN) $475
- Brand new.Call
- nice13 hp kawasaki ,40''cut rider mower (western mn ) $300
- very nice murray rider mower,in good condition.it mows nice $300dollars obo gear shift.has works headlights and is a good mower! can deliver for a small fee call
show contact info great mower and one that works like new
- Mac tools S182 & S184 wrench with bonus!!! (Moorhead) $40
- I have a Mac S182 9/16" Long reach offset socket wrench and a Mac S184 13MM Long reach offset socket wrench. I am also throwing the other tool in. I have no idea what it is but am pretty sure it has to do with body work.
Thanks for looking
- Blue-Point, Mac, Porter ferguson and Misc. (Moorhead) $150
- I have some body tools for sale. Blue-Point BF610A hammer shrinking with original Snap-on handle Plomb 1429 body hammer, Mac Sandpaper holder, Blue-Point BF142 File holder, 2 Heller file holders, 1 Misc. file holder, 1 Martin-Senour sandpaper holder, [...]
- 10" table saw $150
- 2hp 10" tablesaw. In storage for many years, but still works like new. Selling for my dad.
- dyson vacuum articulating hard floor & rug attachment (south fargo) $30
- Used a few times, in new condition. This has a flat setting for floors and a raised setting for use on delicate rugs (that you don't want sucked into the canister with the upright)
The Dyson Articulating Hard Floor and Rug Tool is designed for impro [...]
- AWESOME STUFF BLOCK SALE (SOUTH MHD)
- AWESOME STUFF BLOCK SALE - 4018 10TH ST S - MHD
- Secure your summer projects... (south fargo)
- Great deal on 5ft. Ratchet Tie Downs! No hooks but can be easily tied to the box of a truck, trailer, etc. I've got plenty for all your project needs. $0 .50 each
- Towel Dispenser For Shop (south fargo) $10
- I have a nice towel dispenser for you shop or garage. You can Buy roll towel at Sam club.
- Snap on road box (Hawley ) $1000
- Snap on road box for sale great condition
$1000 or best offer price negotiable Thx for looking Call or txt 218 three two nine 5879 Â•do NOT contact me with unsolicited services or offers a
- sheet sander 1/3 (south Fargo) $10
- It's summer and it's project time!
It's 1/3 sheet sander for $10 only!
- roybi portable saw (so. fargo) $20
- selling a small roybi saw in good condtion. u will need a battery and charger. if you already have batt and charger u are in luck.
- Snap On bit driver (South Fargo) $30
- Snap On bit driver for sale. Includes charger and extra battery. Asking $30
- Mac tools 1/4" impact wrench (South Fargo) $125
- Selling a 1/4" impact wrench in great condition. Asking $125 o.b.o
- Mac tools 3/8 drive air ratchet (South Fargo) $90
- Selling a 3/8 drive air ratchet. In like new condition asking 90 o.b.o
- NEW! Master 55,000 BTU forced air heater. diesel or kerosene. (South Fargo) $100
- I've got a brand new, still in the box, never used Master Premium B55CT kerosene or diesel forced air heater for sale. Puts out 55,000 BTUs of heat, good for a small, well ventilated shed or garage. Got it with the intent to use, but I'm never going [...]
- Mr Heater shop heater (Fargo) $180
- Mr. Heater shop heater, used only one year. Only selling as I switched heaters, good radiant heater. Just the heater new last year was $400+tax.
$180 or best offer, will sell the deflector panel with it. Here is the model. http://www.northerntool. [...]
- Wagner StainMate (South Fargo) $15
- I have a Wagner StainMate for sale. Bought it at Menards a couple years ago but never even opened the box so it's still brand new...it's still stapled shut. It will suck the stain from the can and dispense it through the applicator pad with a squeeze [...]
- Trailer / Tools / Garage / Shop / Farm stuff
- For Sale: Craftsman 3 drawer tool box nice shape $30.00. Homemade pressurized pot sand blaster $100.00. Two rotary buffers / sanders, $25.00 each. Random orbital buffer $15.00. Multiple bolt / hardware oraganizer units $25.00 for all. Heavy duty engi [...]
- Cordless Craftsman saw and drill set (north fargo) $75
- Craftsman cordless saw and drill set. It is 18 volts and comes with the case battery charger and a brand new battery. At a local dealer the whole set would cost about $170.00 or more. It is in great shape. I am only selling it because I bought a new [...]
- Matco hotrod edition Toolbox (morris) $4500
- Matco 4s triple bank Hollywood hot rod 3years old it has the nice upgrade door liners installed. Great condtion just selling because I got out of the business and don't need any more. Call or text if you have any ? 701 three zero six 1094.
- Ingersoll-Rand Chain Hoist 1 1/2 Ton (Fargo, ND) $85
- Up for sale is NEW Ingersoll-Rand 1 1/2 Ton Chain Hoist:
- Model # SM015-10-8-E.
- This Hoist is brand new, but box was damaged during shipping.
- 10' of lift. Hand chain is 2' less than lift.
- Meets ASME B30.16 (American National Standards Inst [...]
- Ingersoll-Rand Chain Hoist 2 Ton (Fargo, ND ) $85
- Up for sale is a NEW Ingersoll-Rand 2 Ton Chain Hoist:
- Model # SM020-10-8-E.
- This Hoist is brand new, but box was damaged during shipping.
- 10' of lift. Hand chain is 2' less than lift.
- Meets ASME B30.16 (American National Standards Instit [...]
- Lot of old hand tools, bits for Brace & Bit and other (Erhard) $35
- Hi there,
I have this lot of old hand tools I am selling. What I have mainly is several bits from the old Brace & Bit tool. They are a bit rusty :) There is also some odd looking heavy cast iron tool which I have no idea what it's used for. It's ver [...]
- 10HP generator (hawley) $500
- generac 10 hp. generator in very nice condition, runs perfect. has wheels so easy to move around, 5 gal fuel tank, 5,000 watts power plus, made in usa, briggs engine, low oil sensor, 6250 surge watts, low tone muffler, circuit breaker protection. 120 [...]
- TOOLS & MUCH MORE (Detroit lakes) $10
- Hi I'm moving within the next three weeks and these are things I'm looking at selling for a good deal.
Automatic garage light - $5 Radiator space heater - $10 Shop Vac - $20 Gas Jug - $5 Drop cord - $5 Stud finder - $10 Propane grill - $5 Wee [...]
- Recipercating Saw (Detroit lakes) $15
- Asking $15.00
The variable speed dial on the side seems to work when it wants to.(still works great on high speed) Please no texting Thank you
- Metal car ramps (Detroit Lakes) $15
- Asking $15.00
One of the support bracket under the ramps is slightly bent (See picture) Please no texting. Thank you.
- Metal Cabinet (Shelves) (Moorhead) $100
- Heavy Duty All-Steel Inc. Metal Cabinet with 4 adjustable shelves. Some scratches but in good condition otherwise. Great for shop, garage, or basement!
36" W x 42" T x 26" D Call or text: seven 0 one - 361 - seven596
- ladder for sale (Keller 8ft) (Fargo) $75
- Great heavy duty professional ladder. 300 lb rated. Still in excellent condition. Needed to clean up garage and dont use it anymore. Call or text 701-202-55four7.
- North Star Air Compressor (Park Rapids ) $950
- North Star Air Compressor for sale, It's a 5 horse power 2 stage, 80 gallon tank and 17.9 CFM. New we paid 1299.00 will let go for $950.00 It is about 1 year old. Excellent condition. Located in a business in Park Rapids.
- SNAP ON KR 1000, 53WX29DX46H ROLLER TOOL BOX (BRECKENRIDGE MN) $1895
- For Sale: Snap On KR 1000 roller bottom tool box, 53"wide x 46" high x 29" deep in very good condition, weighs close to 700lbs, has spring loaded casters, $1895 cash only, call contact number
- Snap on toolbox (West fargo) $2100
- Nice Snap On tool box extreme green in good condition $2100 70130six5609
- IR Quantum 1/2 ton Electric Chain Hoist (west fargo) $1500
- Used 1/2 ton electric chain hoist in good shape. These retail for around 2500.00
It's a IR Quantum 1/2 ton which requires a 3 wire 220v circuit to operate. Looking for 1500.00 obo cash only. Open to possible trades, the worst I can say is no. Cord [...]
- Brand new cornwell toolbox (west fargo) $2000
- I have a brand new cornwell 44in 7 drawer tool box with a flip open lid, . Box is still in the plastic and on the pallet ready to go! I'm am open for any trades as well, let me know what you have. 2000$ obo
Mac Matco snap on tool tools craftsman wre [...]
- RYOBI 32' Bandsaw $240
- RYOBI 32' Bandsaw includes 2 new blades.
- Wet/Dry Concrete saw $200
- Wet/Dry Concrete saw. Used once. Still have the paperwork for it.
- Shopsmith Mark V (Menahga) $750
- Shopsmith Mark V, Model 510 Home Workshop system. Includes bandsaw blade, table saw, drill press, sander, lathe and table extension. Also includes box of attachments. Like new.
- Craftsman Tablesaw $125
- 10' Craftsman Tablesaw like new.
- Measuring Wheel C.H. Hanson Co (Fargo) $30
- For sale is a like new measuring wheels, used a couple of times only. It has a large wheel diameter and a collapsable handle for easy storage.
Email call or text show contact info Ryan
- Campbell Hausfeld air die grinder (Fargo) $10
- For sale is a Campbell Hausfeld air die grinder. It has been used but still operates as it should. First $10 takes it.
Email, Call or Text show contact info Ryan
- (2) Tennant Shop brushes p/n 05725 (Enderlin) $200
- For sale 2 Tennant floor cleaning brushes for shop floor cleaning machines. They are brand new, they were the wrong p/n when ordered. Will work on many different floor cleaning machines, price is $200 each firm, they are $225 ordered new. Please cont [...]
- Garage Door Opener (West Fargo) $75
- Used LINEAR garage door opener
Good Condition for 7 foot door safety "eyes" and mounting brackets included NO REMOTE $75 OBO
- Carpet Stretcher $75
- Older Roberts Stretcher.
- USED ROLL FORMING JOB SITE PORTABLE CONSTRUCTION EQUIPMENT (ISA) $67
- USED/refurbished/1YEAR WARRANTY.
PLUG IT N & equipment ready to work GROVER combination downspout/elbow machine --- $37,500.00 Used 5"/6" & combo seamless gutter machinery. 1/2 of a new one. Standing Seam residential metal roof machine by JobSite [...]
- DeWalt Radio / Charger combo with battery (Casselton / Fargo) $125
- works great 1/8 inch aux jack, not many hours on it since new. First $125 cash takes it comes with one 18v battery
show contact info replaced with bose soundlink is reason for selling. Live in Casselton but will bring to fargo if needed
- Troy Drywall Lift (Fargo) $175
- 11ft Drywall Lift. Used it for hanging 12ft sheets. Great condition as I only used it to finish my garage. Text me if you are interested.
- Black N Decker 18V cordless Drill (Hawley) $15
- This drill works good.
Both batteries come with but are at that point where you need to keep one on the charger at all times. I am sure you could buy a new battery for it if needed but it does work as is. I got a different one for my birthday and do [...]
- 5 Industrial 3 phase wire feed welders (Audubon) $600
- I have 5 Lindy / Union Carbide continuous duty 3 phase industrial welders for sale along with a large inventory of tips liners and consumables, attachments and parts. One of them is a 200 amp set up for stick welding. Three of them are 300 amp machin [...]
- MAC TOOL CART (Moorhead) $350
- 3 drawer mac tool cart/tool box. I don't need it anymore due to job change. It is in great condition, and locks. Please call
show contact info Asking 350.00.
- 2005 40 foot Snorkel Man Life (Fargo) $18000
- 2005 40 foot Snorkel Man Life
Excellent condition. Newly re-painted. All mechanics and moter work great. Serviced recently with update drive gears. $18,000 Please call Terry at show contact info with questions or interest.
- Model 1432 DRUM MICROMETER: BEAR MFG. CO. Rock Island Illinois (Fargo)
- Model 1432 DRUM MICROMETER:
BEAR MFG. CO. Rock Island Illinois Fully functional.
- Scaffold Posts for sale (Moorhead) $950
- Selling 50 new 1-5/8" scaffold posts for guard rails. Purchased wrong size by mistake.
- Rockwell Uni Saw - Table Saw (Thief River Falls) $500
- For Sale: Rockwell Uni Saaw
Commercial table saw in excellent condition.
- Knife Making Forge Montana Made Custom (Park Rapids) $275
- For making custom knives - do it yourself. When I was living in Lincoln, MT a good friend of mine (Rick Dunkerly) MT's first master knifesmith, put on his first bladesmithing class & I took the class. As a result, I made this forge under Rick's guida [...]
- 4 1/2 in jointer $100
- 4 1/2 inch delta jointer-3 blade-on wheels excellent condition $100.00 Call
- Drywall stilts (North fargo) $45
- Set of drywall stilts. Email or call Nancy at (701) three 6 1 - two eight 3 3
- DeWalt Air Compressor, Twin Tank D55580 (North Fargo) $225
- DeWalt twin tank air compressor, model D55580. wheel barrow type. 125 PSI. Please email or call Nancy at (701) 3 six one - 2 eight three 3.
- 35KW THREE PHASE GENERATOR (THIEF RIVER FALLS) $6000
- Cummins/Onan 35KW LP/Natural Gas 3 phase generator for sale. Only 37.5 hours on unit. Engine is a Ford 6 cylinder. Also has 20KW load bank on the side. Recently refurbished. $6000 OBO.
- Snap On tool box (Harwood) $2750
- Snap On top box. Cranberry red with color matching custom built cover. It is a model KRL791APM. All drawers are smooth and work perfectly. I have keys for the lock. Asking 2750 OBO.
- Scaffolding (Fargo, ND) $250
- Northern Tool Metaltech scaffold set
Used very little Very good condition http://www.northerntool.com/shop/tools/product_200442268_200442268 (4) casters (2) uprights (2) X pieces (2) platform sections I purchased everything new last fall for [...]
- Performax drill press with laser (Fargo, ND) $60
- Performax drill press
Laser Work light Works fine Some surface rust $60 cash only Call or text - 701 fivefourone 32 thirty three
- Welder w/tank (Detroit Lakes) $750
- POWER-MATE Welder 160 AMP wire feed - model 117-037 w/tank $750.00. Dwayne 651-two83-8566 call or text.
- OREGON CHAIN SAW PROOF BOOTS (Moorhead) $75
- OREGON CHAIN SAW PROOF BOOTS. Brand new! Size 14 no studs $50 and size 10 studded $75. These are high
- New in Pkg. 65ft. outdoor extension cord (south fargo) $30
- Brand new in the pkg. 65ft. Super flex, outdoor, lighted extension cord. (3-wire grounded) This cord is: all season, durable, & multipurpose. 15 Amp/1875Watt. Also features "red glow indicator" that shows power to the cord. $30 OBO. Thanks.
- 1 1/2" WLL USA 20TON CLEVIS (west fargo) $12
- I have 2 cleveses with pins. They are for heavy farm use or construction use. They are $12.00 each. If interested call the contact #.
- Flooring nailers strecher and more
- Recently retired from the flooring installation business and am selling all my tools. Everything you might need to start your business or back up. $1200 or best offer
Call if interested two 1 eight 820 544five. Best to reach me after 2