- 7 1/2" Black&Decker Bandsaw (Elm Creek) $50
- I have for sale this older 7 1/2" bandsaw by Black & Decker. It's in good operating condition despite its age. If you're interested it's located at 511 No McComb in Elm Creek. Email in advance to insure I'll be here. $50.
- Freeman trim nailers (GI east) $50
- Freeman trim nailers. New in box
1 1/4" narrow crown stapler 1" pinner $50 a gun or will discount on amount bought
- Router table (1107 15th Ave. ) $25
- Router table with mitre and mounted on a collection stand. All in good condition. Call 236-5400 Kearney
- mower (kearney) $100
- i will remove ad once the item is gone. if this ad is still posted it is still for sale. thank you.
please send your name & phone number with your email. thank you. i have for sale for $100.00 firm: a craftsman self propelled lawnmower. it has a 2 [...]
- NiceToolboxs $500
- For sale or trade two ALUN Delta Pro Toolboxs 6' long 13.5 wide 16.5 tall like new $500 or trade for pickup flatbed! Flatbed trailer or stock trailer
- Aluminum Diesel Fuel Tanks 65 gal. (Hastings) $175
- I have for sale 3 UNUSED Aluminum Diesel/Kerosene fuel tanks. $175 each. (These tanks are NOT for gasoline.) (I only have 3 out of 14 left.) Tanks measure 54"s long, 18"s tall and 22 1/2"s wide. They are odd shaped but can be retro-fitted to work in [...]
- Tail Pipe-expander straightener (Glenvil) $10
- Want to sell a vintage tool used to straighten or expand tail pipes. Would like $10. You must pick up.
If interested call between 11:30 and 12:30 noon and between 4-8 pm. Please do not call after 8 pm. 402-771-2420
- Adjustable Wrenches (Kearney) $10
- 1-10in PENENS CORP.2- 8IN NAPA
- Gasoline Air Compressor (Columbus) $700
- Gasoline Air Compressor DP-6518 - 700.00 never used
6.5 HP O.H.V. HONDA Gasoline Engine Rugged Cast Iron Tri-Tech Oil Lubricated Pump generating 150 P.S.I. 18 CFM @ 100 P.S.I. Tank Pressure Reading and Delivery Pressure Regulator 10 Gallon A.M.S [...]
- Titan 8500 watt generator - barely used! (Henderson, NE) $1200
- For sale is an 8500 watt gasoline powered heavy-duty industrial generator. It is Titan brand. Asking $1,200 for it.
Has 120v/240v output. It was purchased brand new 2 years ago and has been used sparingly. It is in great shape and there is absolut [...]
- Hobart 350 Amp Diesel Welder Generator (Axtell ) $2800
- 1991 model year with low hours (327) on Perkins 4-236 diesel engine. Runs great, welds great, just don't use enough to keep around. Has some newer wiring, throttle cable and temp gauge. Comes with approximately 50ft each, ground and hot cables, both [...]
- Heat Fans- 480 volt 3 phase (Bladen, Ne) $200
- 3 phase, 480 volt Fostoria Heat Fans. Will take $150 for each or $250 for the pair.
We bought them not realizing they we're 480 volts. Call or text at (402)-469-1812
- Mac Tools 50th Anniversary 1/2" impact wrench (Kearney Area) $100
- Mac Tools 50th Anniversary 1/2 " impact wrench. Works great. Don't know what it's worth so I'll start at $100 OBO.
- OIL Barrel/BURN Barrel 50 gal Drums (marquette) $25
- I have 17 50gal drums I am selling for 25$ a piece,
if you want them cut open its $30 a piece. I have one retro cool Pennzoil and one cool retro Quaker state.. they are $40 each. call or text me @ four0two)3sixsix-6one3one. can deliver for extra.
- Campbell Hausfeld 60gal Air Compressor (Hastings) $400
- PRICE REDUCED**$400.00 OBO - Cast Iron, twin cylinder pump , One-Stage Electric Powered Air Compressor. Integrated. Bucket level tank drain to conveniently drain moisture. 240v, 15amp, 60hz, 1phase. 3hp--7hp peak, 10.2 cfm. Single stage belt driven [...]
- Hitch hoist (Lindsay, Ne) $175
- I have for sale 15 hoists. They are great for anything from pivot tires and gearboxes to outboard motors, skinning and gutting wild game to raising the front of your riding mower. Use your imagination. I have loaded welders, drill presses, band saws, [...]
- 55 gallon steel drum closed top (Kearney) $20
- Used 55 gallon steel drum. It has a closed top and I have the large and small plus to go in the holes.
308-four four zero- five 347
- Refrigeration Leak Detector (propane torch attachment) (Glenvil) $20
- For sale two refrigeration or freon leak detectors for HVAC to find leaks. Both will come with a new disposible propane cylinder. Similar to a product called Turbo Torch, frequently used for auto air-conditioning leak detecting. I have two and would [...]
- Antique Leak Test Plugs for 4" cast iron pipes (Glenvil) $15
- For sale 2 leak test plugs for 4" cast iron pipe. They were used to plug the pipe to determine if it leaked when they were welded together. They are unmarked and wing-nut style. I believe the wings still move. I would like $15 for the two. Cash only [...]
- Antique Windmill well tool--pipe dog (Glenvil) $10
- ANTIQUE HEAVY DUTY PIPE DOG- USED - PULL PIPE AND PUMP FROM THE WELL
This tool was used to pull pipe from the well when windmills were used. $10. Cash only please, no checks. You pick up If interested Please call 402-771-2420 between 11:30 am and [...]
- generator (ord ne) $350
- 3250. Watt generator
- DIGITAL SCALE 5 LB (KEARNEY NE) $5
- Neopost 5 lb scale. Model SE37. Very accurate scale once used to print postage now can be used to weigh anything 5 lbs and under. Kitchen and garage uses and many more! Light weight and small so it won't take up much space. Appox. 8x12x3 in. No batte [...]
- Snap On Tool Box KRL 1022 (KC) $6000
- I have a used snap on tool box model KRL 1022. It was bought in 2007 and has just sat in a garage. No damage to the box. Has hardly been used. I bought it to take to work and then switched jobs so didn't need it anymore. Stainless steel work surface [...]
- MAC Tools 3 drawer utility cart ((obo)-Kearney) $800
- For sale is a Mac tools utility cart. It has 3 slide out drawers and 2 kickout folding stainless steel work surfaces. Still has protective wrap over top of surface. Includes cover, both keys, and drawer liners. Please feel free to email,call, or text [...]
- Air hose (Grand island) $50
- Brand new air hose 50' long
Asking $50 obo 308-383-7206
- 1/2 in drill (Kearney) $20
- I have a vintage 1/2 inch drill I used for drywall mud mixing works great I just put a new cord I'm asking $20.00 It is from speedway mfg. co. Type 400 115v.
- 4" grinder wheels lot of 12 (Kearney) $12
- I have an assortment of grinder wheels 3 are dewalt cutoff wheels and the rest are off brand 5 metal cutoff, 2 masonry cutoff, 1 grinding, and 1 masonry grinding wheels. There are 12 in all they are new never used and at a $1 each is not a bad deal s [...]
- Husqvarna Pole Saw (gi) $400
- Husqvarna Pole Saw trimmed trees with it one year and ran about two tanks of fuel through it. It has the fiberglass shaft and is commercial grade. I bought it new for $800 and I am offering it at half price $400.00. Call or text 308-391-1978
- Senco 1 Inch Staples (GI) $30
- Senco 1 Inch Staple Class1 Galv. For MW,PW,SPS, 1 1/4 Leg .more than 9000 Staples. Used for Duo-Fast Gun
- Sears 16 inch Scroll Saw (GI) $60
- Sears 16inch Scroll saw 2.0.amp motor. Used very light
- Industrial Sewing Machine (Giltner Ne) $500
- Tac Sew 20U43 Industrial sewing machine with heavy duty table and high speed motor. Extra bobbins, attachments, oil and sewing light. Has been serviced and ready to sew. Runs great.
- Snapon punch and chisel starter/pin/flat 21 pieces. (Gothenburg) $300
- Snap on brand, good condition, $300 or best offer.
- Craftsmen drill set (Doniphan) $150
- This craftsman set has a brand new drill never been used. The charger and batteries are one year old The skil saw has a brand new blade in it only used once. The skil saw and saw are two years old only been used a couple of times. I am asking 150.00 [...]
- Bosch B - 7000 Corner - Detail Sander Brand New ! (Hastings ) $25
- Bosch B - 7000 Corner Detail Sander Brand New. Used Only Once ! Still Has Factory Tags. In Original Box ! Cash Only. Price is Firm. Comes from a Smoke Free Estate of Items. Be sure to include your Direct Contact Information when Inquiring Please. F.C [...]
- Snapper snow blower (Columbus) $100
- 3203E works great.
- Toolboxes For Sale (St. Libory) $175
- I have a 9 drawer Clarke HD upper tool box for sale. It has the ball bearing drawers and is in great shape. I also have a Craftsman ball bearing/grip latch middle for sale- also in great shape. I would love to have these gone today if possible. Pleas [...]
- Wacker BS60-2i jumping jack packer (Albion) $500
- runs and ready for work
- Montezuma toolbox and craftsmen tools (Pleasanton) $2500
- Montezuma toolbox full of every craftsmen tool standard and metric. Also files pliers hammers and screwdrivers two of every wrench and ratchet plus more
- 18 VOLT DEWALT $125
- USED BUT STILL WORKING PROPERLY, JUST WENT TO MILWAUKEE, COMES WITH BOTH BATTERIES AND 2 CHARGERS
- DeWalt 20v Brushless Impact (Kearney) $350
- 20v brushless impact. Also includes 2 batteries and a charger. Less than 6 months old, still in excellent condition. Would also would consider a package deal with the 12" miter saw I have posted. Not wanting to sell but need the cash more at the mome [...]
- DeWalt 12" Compound Miter Saw (Kearney) $350
- 12" compound miter saw. Single-bevel. Works great. Also including 2 blades brand new in package. Don't want to sell the saw but need the cash. Would also consider a package deal with the 20v impact driver I have posted. $325 o.b.o. Call or text 308-9 [...]
- Central Pneumatic Floor Nailer w/hammer like new (Grand Island, NE) $185
- Central Pneumatic Floor Nailer with hammer. Uses 15 Gauge 1" and 2" long 1/2" crown. And Cleat nails 16 gauge 1 1/2" to 2" long.
Used very little---LIKE NEW.
- Lincoln grease gun (Loomis) $100
- Lincoln cordless grease gun. It has two good batteries and works well. Comes with charger. $100. Call or text 308-999-0560
- 5ft Craftsman drill press (superior) $300
- I have a nice craftsman drill press used very little it been siting in storage an I no longer need it
1hp 5/8 chuck located in superior call 402 879 5602 can deliver it Friday to grand island asking $300 cash firm
- snap on tool box (st paul) $4500
- I have a nice tool that i don't need anymore. It is in good shape $4500 call Tim 308-750-4412
- 14.5 ft metal brake $1500
- Like new 14'6" metal brake 19" depth portable
- Special Edition Ted Nugent Spirit Of The Wild Camo Snap On Tool Box (Grand Island) $8000
- Basically brand new snap on tool box. Special edition Ted Nugent Spirit of the Wild Camo box. Comes with two hutches, all drawers work properly. Locking cabinets, just wanting to sell asking $8,000 OBO cash only. No trades, first come first serve. I [...]
- oxegyn, acetylene torch (Grand Island) $500
- Title and picture says it all, call if interested
- Compressed Air Drill (hastings) $35
- Cummins power drill, works great
- 3/4 inch impact sockets & oxygen/acetylene hose (Huntley, Ne)
- Sockets Brand New, Never Used, full set of 8 ranging in size from 15/16 to 1 1/2" asking $100 OBO
Oxygen/Acetylene Hose, Brand New, Never Used, approx 20 ft, asking $10
- Coleman Contractor Air Compressor (Grand Island) $200
- Twin Cylinder Coleman Air Compressor. It has a electric motor that needs replaced. The compressor works fine. This unit is over $1000.oo anywhere you look. The motor is an easy fix. It should be at least 2 H.P. There is fresh oil in the compressor, a [...]
- Rolling Work Bench (Juniata) $125
- Very heavy duty rolling work bench call or text 4024697328
- Concrete Vibrator-Submersible Pump $1200
- Concrete Vibrator-Submersible Pump - New 1200.00 OBO
6.5 HP HONDA GX200 OHV Engine Submersible Pump 3" Discharge 25 Foot Depth 150 G.P.M. 22 Inch Vibrator 25 ft Reach 11,000 Vib/ Min
- 10 Inch Miter Saw (Hastings) $100
- Craftsman miter saw with stand 10 inch
- Radial arm saw (Hastings) $250
- Craftsman 10 inch radial arm saw very good condition
- Heavy Duty Utility Cart (Minden, NE) $50
- Heavy Duty Utility Cart, has straps to hold TV or whatever you put on there, also electrical cord and extra plugs to make into an entertainment unit, or for garage equipment. Easy glide rollers.
32" W x 22" D x 54" H-$50 cash only, firm Like New Con [...]
- 3000 PSI Power Washer (Kearney)
- Gas powered pressure washer 2.5 gpm 3000 psi 208cc Low Profile. New condition. Missing hose/wand.
- Low Profilt Crossover tool box 70" $175
- 70" low profile cross over tool box with keys.
- Chain Saws (Kearney)
- I have a several chain saws for sale. All are new or newer and have been tested. Following are the models I have.
Husqvarna Gas 445 Husqvarna Gas 435 Husqvarna Gas 235 Husqvarna Electric
- ELECTIC MOTOR (Cozad) $75
- Guns good
Good for power tools or fans
- Rolair portable compressor (Central city, ne) $650
- Rolair portable air compressor. I've only ran about 3-4 tanks of fuel through this compressor. Bought new in 2011 for $1100. Asking $650. Everything is in great shape mechanically and cosmetically.
- 60 gallon Ingersoll-Rand air compressor
- 60 gallon 3hp Ingersoll-Rand air compressor, 220volt
- Submersible Sump Pump (Minden, NE) $65
- Submersible Sump Pump, Ace Brand, 120v, 1/3HP, very good working order-$65 cash only.
Bought this new in 1999, only used it for 3 wks. Have original box with instructions.
- wanted used siding brake
- wanted used siding brake
- cnc (oneill) $11000
- 4x8 cnc with indexer comes with aspire comp with mach3 and tooling 11000.00 you load it call 402 340 2232
- 40-440 Scroll Saw $150
- Rockwell 40-440 Scroll Saw. New motor. A couple of plunger parts are bad or missing.
- Vintage Metal Lathe (Albion) $650
- Vintage Metal Lathe with motor..works great $650 402-649-147two
- 300,000 btu torpedo heater (grand island ) $650
- bravo heater it works, its older one but never had any problems with it I did by pass the switch when it when bad but that easy to fix, use #2 diesel, most of them been going for 900 or more this one is price to sell call or text for pics 308-380-262 [...]
- IR impact (Paxton) $425
- 1/2 inch 1200 ft lb impact used very little. Open to trades or cash.
- wood shop equip (hastings) $150
- craftsman 10" band saw. craftsman 6" jointer.
- Heater (Clarks) $75
- I have a mr heater hero propane heater and propane tank. The heater is quiet and runs on electric or rechargeable built in battery. Heater and propane tank were bought new at menards for a total of $220.00 plus tax. The items are in excellent conditi [...]
- Like New 3/8" & 1/2" Snap-On Impacts (Lincoln ) $650
- Hi, I am a student at SCC Milford, my name is Taylor. I bought these Impacts in July of 2013 and they haven't really been used all that much since I've been at school most of the time. I got them with a 2 year warranty so they should still have about [...]
- numax SFL618 hardwood flooring nailer (arapahoe area) $100
- 1 barely used numax SFL618 hardwood flooring nailer for sale.
I used this on one room, and it worked flawlessly. Comes with a partial box of staples, and the mallet it came new with, and a second plate for an alternate flooring thickness. I also hav [...]
- Brass recovery system $250
- These units are $500 new this one has had very little use and is in perfect condition. We no longer need it. Please feel free to call or text questions to 402-366-1596.
The Ammo-Up will pick up all rifle and pistol brass with the exception of the .2 [...]
- Tanaka TED-270PFR Brand new no box $250
- This is a brand new gas powered drill. I do not have hte box but you can tell it's never been fuled or ran. They are $630 new. Save big on this one. Works great for fencing or construction projects that require a powerful drill and no electrical sour [...]
- GENERATORS, Portable Electric
- Powermate & Briggs & Stratton Generators (See attached photos)
Powermate PM0101207 1,200 watt V-Frame, Like New $195.00 Powermate PM0123250, 3250 watt, 2-hours, $275.00 Powermate SX5500, 5,500 watt, 124 hours, $350.00 (2)- Briggs & Stratton Storm [...]
- Tool post set (Atlanta) $225
- This is a brand new never used tool post for a metal lathe. It fits lathes with a 9-12" swing. The brand is Phase II AXA wedge style tool post. It comes with the set of turning tools. Knurling tool, 5/8" boring bar holder, 1/2" part off tool, and 2 t [...]
- Mitutoyo Micrometer Set 0-6" (Atlanta) $450
- Set of Mitutoyo micrometers ranging from 0 to 6 inch. Comes with the setting standards and wooden box. Call 3o8-99l-63ol.
- Schumacher EO5 battery charger new! (Holdrege) $55
- bunch of items for sale in holdrege. selling to get to texas to my son.and take care of personal matters. I'm selling a schumacher EO5 battery charger thats has been opened, but never been used asking $55 or best reasonable offer. need to sell ASAP.
- 2004 Haulmark 6x12 Enclosed Trailer (Kearney, NE) $2300
- My Son used my trailer to move to Nebraska last year. If it doesn't sell by mid-May, I'm coming out to get it. It has some interior lights, a breaker box and is set up for a generator. It has a drop down rear ramp door and a smaller side door. It's v [...]
- Jorgensen Mitre Box hand saw (Grand Island) $15
- Nice Jorgensen mitre box with hand saw. $15
308 227 0084
- Air compressor (Grand island) $700
- 120 gallon champion air compressor ..
Good compressor i just cant use it at my shop due to being a 3phase motor and i dnt hv that power at my shop so im selling to buy a 220v air compressor but its a good compressor .. 308-227-osixtwo3
- Snap-On 3/8 torque $170
- Snap-On 3/8 Toque Excellent condition
- want used siding brake
- looking for a good used siding brake
- 16" mcCulloch chain saw (hastings) $40
- Electric chainsaw 16" used 1 year ago been setting in the garage. Asking 40 but open to offers, txt or email only.
- ClimbTek ladder (hastings) $60
- 12 foot ClimbTek articulating ladder, barley used in great condition. Asking 60 but open to offers, email or text only.
- IDEAL Clamp METER (Kearney) $30
- REDUCED TODAY Good condition with test leads and pouch AC DC 400A 600v
- gates 3000b hose crimper w/ dies $1800
- I have a gates 3000b hose crimper/and pump with all the dies up to 1 1/4. the pump is 3 phase works good. $1800 obo new it would cost $6000
call keith at 308 -seven 30-2610
- ammco 4100 brake lathe (ord ne) $2000
- I have a ammco 4100 brake lathe loaded with all the tooling. was rebuilt 4 years ago. wooks good just don't use it anymore.
call keith at 308 seven 30- 26one 0
- drywall stilts $125
- Dura-Stilt 18" to 30" drywall stilts
- parts washer (Aurora) $100
- homemade parts washer- circulating pump works well. Can deliver to GI if needed. 402-469-5216
- Vintage Snap On Tool Box (GI) $1800
- Vintage 1969 KRA 61B Snap On matching tool chest. Very nice condition for being 45 years old. Draws and slides all in good condition and open and close as they should. I bought this from Snap On about 12 years ago, the dealer said that the original o [...]
- Heavy Duty Stand/Bench Grinder (Aurora) $100
- HEAVY stand, works well-needs stones. $100obo. Can deliver to GI. 402-469-5216
- Dewalt 9" hand grinder (Grand Island) $50
- Good 9" Dewalt grinder, approx. 8 yrs old. Very good shape and works well. It has the most torque I've ever seen in a hand grinder. I've sold my shop and don't have a use for it anymore. No spam and if the ad is up-it's still available.402-469-5216
- tool box. for shop or garage (Kearney, NE) $450
- I have a 5 drawer black toolbox looking to sell asking 450 or best offer. Box has some use.
Good for home shop or use on the road. Have keys and locks on box. Calls/ texts between 6 am- 10pm
- Hitachi C10FL industrial table saw (Columbus) $400
- Hitachi C10FL industrial table saw. Runs good. Just upgraded. Asking 400 obo.
- Industrial Router table and Router - Craftsman (Columbus) $125
- Craftsman industrial router table and Craftsman model #31517381 router. Works good just upgraded. Asking 125 obo
- Chicago pneumatic 1" impact $200
- I have a Chicago pneumatic 1" impact wrench. Works great! Asking $200
- Digital levels
- I have 2 pro smart levels by wedge innovations. One is 4 foot the other is 6 foot. Asking $150 a piece or I'll let them both go for $225. Call me @ 308 seven five zero 4951.
- Weed Wackers (Minden) $20
- Battery powered. Works good!!
2 Black and Decker weed wackers and 2 batteries.